Cis 175 Final Exam Solution

In: Historical Events

Submitted By robertporch
Words 890
Pages 4
CIS 175 Final Exam Solution http://www.homeworkwarehouse.com/downloads/cis-175-final-exam-solution/ CIS 175 Final Exam Solution
Question 1
The image below is an example of what type of WAN connection?
Question 2
Which of the following is a type of coaxial cable? (Choose 2)
Question 3
Which of the following is a common Layer 2 protocol that could run over a dedicated leased line?
Question 4
SONET uses ________ cabling and offers high data rates, typically in the ________ Mbps— ________ Gbps range, and long-distance limitations, typically in the ________ km— ________ km range.
Question 5
The data rates for T3 link is ________.
Question 6
A common Layer 2 protocol used on dedicated leased lines is ________.
Question 7
If the bandwidth of an OC-1 link is 51.84 Mbps, what is the bandwidth of an OC-3 link?
Question 8
When a wireless channel uses more than one frequency the transmission method called ________ spectrum.
Question 9
To protect WLAN traffic from eavesdroppers, a variety of security standards and practices have been developed, including all of the following except:
Question 10
WLAN security based on a PSK technology is called ________ mode.
Question 11
The wireless device that is marked X in the image below is a ________.
Question 12
WLANs can be categorized based on their use of wireless APs. The three main categories are ________, ________, and ________.
Question 13
Which is NOT a security threat for WLAN’s?
Question 14
Which of the following is one of the broad categories of wireless antennae that are based on coverage?
Question 15
The Wide Area Network (WAN) design below represents what type of fault-tolerant network design?
Question 16
Which QoS design consideration is incorrect?
Question 17
Which term is best described by the following definition: “Both NICs are active at the same time, and they each have their own…...

Similar Documents

Cis 511 Final Exam Solution

...CIS 511 Final Exam Solution To Buy this Class Copy & paste below link in your Brower http://www.homeworkregency.com/downloads/cis-511-final-exam-solution/ Or Visit Our Website Visit : http://www.homeworkregency.com Email Us : homeworkregency@gmail.com CIS 511 Final Exam Solution • Question 1 0 out of 10 points There is no need to re-engineer a process once an ERP project has begun. Answer Selected Answer: • Question 2 10 out of 10 points TQM concentrates on anticipating and preventing defects. Answer Selected Answer: • Question 3 10 out of 10 points BOM is alternately called, “basis of manufacturing”. Answer Selected Answer: • Question 4 10 out of 10 points Position control promotes planning and budgeting of personnel costs. Answer Selected Answer: • Question 5 10 out of 10 points Demand management forecasting is linked to both MPS and MRP. Answer Selected Answer: • Question 6 0 out of 10 points ERP reduces cost but promotes increases in inventory. Answer Selected Answer: • Question 7 10 out of 10 points One reason for ERP failures is attributed to narrow focus. Answer Selected Answer: • Question 8 10 out of 10 points Statistical influences related to data mining are valid for customers and employees but not employers and pubic agencies. Answer Selected Answer: • Question 9 0 out of 10 points Sales forecasting is used primarily to support SCM. Answer Selected Answer: • Question 10 10 out of 10 points Employee...

Words: 10495 - Pages: 42

Cis 511 Final Exam Solution

...CIS 511 Final Exam Solution To Buy this Class Copy & paste below link in your Brower http://www.homeworkregency.com/downloads/cis-511-final-exam-solution/ Or Visit Our Website Visit : http://www.homeworkregency.com Email Us : homeworkregency@gmail.com CIS 511 Final Exam Solution • Question 1 0 out of 10 points There is no need to re-engineer a process once an ERP project has begun. Answer Selected Answer: • Question 2 10 out of 10 points TQM concentrates on anticipating and preventing defects. Answer Selected Answer: • Question 3 10 out of 10 points BOM is alternately called, “basis of manufacturing”. Answer Selected Answer: • Question 4 10 out of 10 points Position control promotes planning and budgeting of personnel costs. Answer Selected Answer: • Question 5 10 out of 10 points Demand management forecasting is linked to both MPS and MRP. Answer Selected Answer: • Question 6 0 out of 10 points ERP reduces cost but promotes increases in inventory. Answer Selected Answer: • Question 7 10 out of 10 points One reason for ERP failures is attributed to narrow focus. Answer Selected Answer: • Question 8 10 out of 10 points Statistical influences related to data mining are valid for customers and employees but not employers and pubic agencies. Answer Selected Answer: • Question 9 0 out of 10 points Sales forecasting is used primarily to support SCM. Answer Selected Answer: • Question 10 10 out of 10 points Employee...

Words: 10495 - Pages: 42

Cis 511 Final Exam Solutions

...CIS 511 Final Exam Solutions Follow the link below to purchase http://www.homeworkarena.com/cis-511-final-exam-solutions Visit Website: http://www.homeworkarena.com/ Please contact us for more Tutorial & Help (climaxbegin@gmail.com) Question 1   There is no need to re-engineer a process once an ERP project has begun. Question 2   TQM concentrates on anticipating and preventing defects. Question 3   BOM is alternately called, “basis of manufacturing”. Question 4   Position control promotes planning and budgeting of personnel costs. Question 5   Demand management forecasting is linked to both MPS and MRP. Question 6   ERP reduces cost but promotes increases in inventory. Question 7   One reason for ERP failures is attributed to narrow focus. Question 8   Statistical influences related to data mining are valid for customers and employees but not employers and pubic agencies. Question 9   Sales forecasting is used primarily to support SCM. Question 10   Employee tracking from application to retirement is known as human capital inventory. Question 11   Order settlement’s goals are to manage operations, quantities and dates. Question 12   Another used for the e-business value chain is “virtual value chain”. Question 13   MPS stands for monthly product status. Question 14   e-Business has transformed customer2customer and supplier2supplier by virtue of data-centric transactions based on high-speed communications. Question 15 ...

Words: 315 - Pages: 2

Cis 511 Final Exam Solution

...CIS 511 Final Exam Solution To Buy this Class Copy & paste below link in your Brower http://homeworkregency.com/downloads/cis-511-final-exam-solution/ Or Visit Our Website Visit : http://www.homeworkregency.com Email Us : homeworkregency@gmail.com CIS 511 Final Exam Solution • Question 1 0 out of 10 points There is no need to re-engineer a process once an ERP project has begun. Answer Selected Answer: • Question 2 10 out of 10 points TQM concentrates on anticipating and preventing defects. Answer Selected Answer: • Question 3 10 out of 10 points BOM is alternately called, “basis of manufacturing”. Answer Selected Answer: • Question 4 10 out of 10 points Position control promotes planning and budgeting of personnel costs. Answer Selected Answer: • Question 5 10 out of 10 points Demand management forecasting is linked to both MPS and MRP. Answer Selected Answer: • Question 6 0 out of 10 points ERP reduces cost but promotes increases in inventory. Answer Selected Answer: • Question 7 10 out of 10 points One reason for ERP failures is attributed to narrow focus. Answer Selected Answer: • Question 8 10 out of 10 points Statistical influences related to data mining are valid for customers and employees but not employers and pubic agencies. Answer Selected Answer: • Question 9 0 out of 10 points Sales forecasting is used primarily to support SCM. Answer Selected Answer: • Question 10 10 out of 10 points Employee...

Words: 477 - Pages: 2

Cis 511 Final Exam Solutions

...CIS 511 Final Exam Solutions Follow the link below to purchase http://www.homeworkarena.com/cis-511-final-exam-solutions Visit Website: http://www.homeworkarena.com/ Please contact us for more Tutorial & Help (climaxbegin@gmail.com) Question 1   There is no need to re-engineer a process once an ERP project has begun. Question 2   TQM concentrates on anticipating and preventing defects. Question 3   BOM is alternately called, “basis of manufacturing”. Question 4   Position control promotes planning and budgeting of personnel costs. Question 5   Demand management forecasting is linked to both MPS and MRP. Question 6   ERP reduces cost but promotes increases in inventory. Question 7   One reason for ERP failures is attributed to narrow focus. Question 8   Statistical influences related to data mining are valid for customers and employees but not employers and pubic agencies. Question 9   Sales forecasting is used primarily to support SCM. Question 10   Employee tracking from application to retirement is known as human capital inventory. Question 11   Order settlement’s goals are to manage operations, quantities and dates. Question 12   Another used for the e-business value chain is “virtual value chain”. Question 13   MPS stands for monthly product status. Question 14   e-Business has transformed customer2customer and supplier2supplier by virtue of data-centric transactions based on high-speed communications. Question 15   ...

Words: 315 - Pages: 2

Cis 175 Final Exam Guide

...CIS 175 Final Exam Guide http://www.homework-bank.com/downloads/cis-175-final-exam-guide/ CIS 175 Final Exam Guide  Question 1 The image below is an example of what type of WAN connection?  Question 2 Which of the following is a type of coaxial cable? (Choose 2)  Question 3 Which of the following is a common Layer 2 protocol that could run over a dedicated leased line?  Question 4 SONET uses ________ cabling and offers high data rates, typically in the ________ Mbps— ________ Gbps range, and long-distance limitations, typically in the ________ km— ________ km range.  Question 5 The data rates for T3 link is ________.  Question 6 A common Layer 2 protocol used on dedicated leased lines is ________.  Question 7 If the bandwidth of an OC-1 link is 51.84 Mbps, what is the bandwidth of an OC-3 link?  Question 8 When a wireless channel uses more than one frequency the transmission method called ________ spectrum.  Question 9 To protect WLAN traffic from eavesdroppers, a variety of security standards and practices have been developed, including all of the following except:  Question 10 WLAN security based on a PSK technology is called ________ mode.  Question 11 The wireless device that is marked X in the image below is a ________.  Question 12 WLANs can be categorized based on their use of wireless APs. The three main categories are ________, ________, and ________.  Question 13 Which is NOT a security threat for WLAN’s?  Question......

Words: 891 - Pages: 4

Cis 175 Final Exam Solution

...CIS 175 Final Exam Solution http://www.homeworkwarehouse.com/downloads/cis-175-final-exam-solution/ CIS 175 Final Exam Solution Question 1 The image below is an example of what type of WAN connection? Question 2 Which of the following is a type of coaxial cable? (Choose 2) Question 3 Which of the following is a common Layer 2 protocol that could run over a dedicated leased line? Question 4 SONET uses ________ cabling and offers high data rates, typically in the ________ Mbps— ________ Gbps range, and long-distance limitations, typically in the ________ km— ________ km range. Question 5 The data rates for T3 link is ________. Question 6 A common Layer 2 protocol used on dedicated leased lines is ________. Question 7 If the bandwidth of an OC-1 link is 51.84 Mbps, what is the bandwidth of an OC-3 link? Question 8 When a wireless channel uses more than one frequency the transmission method called ________ spectrum. Question 9 To protect WLAN traffic from eavesdroppers, a variety of security standards and practices have been developed, including all of the following except: Question 10 WLAN security based on a PSK technology is called ________ mode. Question 11 The wireless device that is marked X in the image below is a ________. Question 12 WLANs can be categorized based on their use of wireless APs. The three main categories are ________, ________, and ________. Question 13 Which is NOT a security threat for WLAN’s? Question 14 Which of the......

Words: 890 - Pages: 4

Cis 552 Final Exam Solutions

...CIS 552 Final Exam Solutions http://hwguiders.com/downloads/cis-552-final-exam-solutions CIS 552 Final Exam Solutions (1) Which of the following is not a virus preventative technique? (2) What is the name of a virus that changes itself when it spreads? (3) Which of the following is a piece of code or software that spreads from system to system by attaching itself to other files? (4) What type of malware attempts to trick victims into purchasing software or providing their credit card numbers? (5) Which of the following best describes what occurs when a lower-level account is cracked in order to obtain increased access? (6) Enumeration can be used to discover all but which of the following types of information? (7) Installing Netcat on a remote system by using an exploit is an example of what type of attack? (8) Which of the following best describes what occurs when a user attempts a connection to a Windows system without the standard username and password being provided? (9) What can an insecure login system provide? (10) Which of these describes a database security problem that occurs when actions of database users are not properly tracked? (11) Changing the content of a Web site with the intent of leaving a distinguishing mark or changing its appearance is __________. (12) Identifying fixes and prevention methods occurs in which of these incident response stages? (13) Which of the following properly describes an IDS......

Words: 483 - Pages: 2

Cis 517 Final Exam Solution

...CIS 517 Final Exam Solution http://www.homework-bank.com/downloads/cis-517-final-exam-solution/ CIS 517 Final Exam Solution • Question 1 Since organizations depend on reliable information technology, there are also huge costs associated with ____. • Question 2 A ____ is a graphic display of data that illustrates the results of a process over time. • Question 3 ____ should be forgotten. • Question 4 ____ describe what the project team has accomplished during a certain period. • Question 5 Those who are ____ have a higher tolerance for risk, and their satisfaction increases when more payoff is at stake. • Question 6 ____ are a good way to highlight information provided in important project documents, empower people to be accountable for their work, and have face-to-face discussions about important project issues. • Question 7 Three separate surveys of software project cost overruns found that the average cost overrun for all of the projects in their survey samples (not just unsuccessful projects) were ____ percent. • Question 8 In any normal distribution, ____ percent of the population is within three standard deviations of the mean. • Question 9 ____ are/is a qualitative risk analysis tool, and in addition to identifying risks, it maintains an awareness of risks throughout the life of a project. • Question 10 A ____ provides an estimate of what a project will......

Words: 521 - Pages: 3

Cis 522 Final Exam Solution

...CIS 522 Final Exam Solution http://www.homework-bank.com/downloads/cis-522-final-exam-solution/ CIS 522 Final Exam Solution • Question 1 Which of the following is not a virus preventative technique? • Question 2 What is the name of a virus that changes itself when it spreads? • Question 3 Which of the following is a piece of code or software that spreads from system to system by attaching itself to other files? • Question 4 What type of malware attempts to trick victims into purchasing software or providing their credit card numbers? • Question 5 Which of the following best describes what occurs when a lower-level account is cracked in order to obtain increased access? • Question 6 Enumeration can be used to discover all but which of the following types of information? • Question 7 Installing Netcat on a remote system by using an exploit is an example of what type of attack? • Question 8 Which of the following best describes what occurs when a user attempts a connection to a Windows system without the standard username and password being provided? • Question 9 What can an insecure login system provide? • Question 10 Which of these describes a database security problem that occurs when actions of database users are not properly tracked? • Question 11 Changing the content of a Web site with the intent of leaving a distinguishing mark or......

Words: 515 - Pages: 3

Cis 175 Final Exam Answers

...CIS 175 Final Exam Answers http://hwguiders.com/downloads/cis-175-final-exam-answers CIS 175 Final Exam Answers Question 1: The image below is an example of what type of WAN connection? Question 2: Which of the following is a type of coaxial cable? (Choose 2) Question 3: Which of the following is a common Layer 2 protocol that could run over a dedicated leased line? Question 4: SONET uses ________ cabling and offers high data rates, typically in the ________ Mbps— ________ Gbps range, and long-distance limitations, typically in the ________ km— ________ km range. Question 5: The data rates for T3 link is ________. Question 6: A common Layer 2 protocol used on dedicated leased lines is ________. Question 7: If the bandwidth of an OC-1 link is 51.84 Mbps, what is the bandwidth of an OC-3 link? Question 8: When a wireless channel uses more than one frequency the transmission method called ________ spectrum. Question 9: To protect WLAN traffic from eavesdroppers, a variety of security standards and practices have been developed, including all of the following except: Question 10: WLAN security based on a PSK technology is called ________ mode. Question 11: The wireless device that is marked X in the image below is a ________. Question 12: WLANs can be categorized based on their use of wireless APs. The three main categories are ________, ________, and ________. Question 13: Which is NOT a......

Words: 889 - Pages: 4

Cis 175 Final Exam Solution

...CIS 175 Final Exam Solution http://hwguiders.com/downloads/cis-175-final-exam-solution CIS 175 Final Exam Solution . Question 1 The image below is an example of what type of WAN connection? • Question 2 Which of the following is a type of coaxial cable? (Choose 2) • Question 3 Which of the following is a common Layer 2 protocol that could run over a dedicated leased line? • Question 4 SONET uses ________ cabling and offers high data rates, typically in the ________ Mbps— ________ Gbps range, and long-distance limitations, typically in the ________ km— ________ km range. • Question 5 The data rates for T3 link is ________. • Question 6 A common Layer 2 protocol used on dedicated leased lines is ________. • Question 7 If the bandwidth of an OC-1 link is 51.84 Mbps, what is the bandwidth of an OC-3 link? • Question 8 When a wireless channel uses more than one frequency the transmission method called ________ spectrum. • Question 9 To protect WLAN traffic from eavesdroppers, a variety of security standards and practices have been developed, including all of the following except: • Question 10 WLAN security based on a PSK technology is called ________ mode. • Question 11 The wireless device that is marked X in the image below is a ________. • Question 12 WLANs can be categorized based on their use of wireless APs. The three main categories are ________, ________, and ________. • Question 13 Which is......

Words: 889 - Pages: 4

Cis 510 Final Exam Solution

...CIS 510 Final Exam Solution http://hwguiders.com/downloads/cis-510-final-exam-solution CIS 510 Final Exam Solution Question 1 Office workers who use the system all day are most concerned about having an interface which Question 2 Data elements in a relational database are organized into ____. Question 3 A ____ manages one or more information system resources or provides a well-defined service. Question 4 In Scrum, the ____ maintains the product backlog list. Question 5 ____ relationship(s) can be represented in a single relational database table using primary and foreign key fields. Question 6 Under which of the following circumstances might a direct installation be a good choice? Question 7 The domain layer focuses exclusively on the ____ classes. Question 8 The development of a structure chart based on a data flow diagram (DFD) with input-process-output data flow is called ____ analysis. Question 9 Which of the following is true of class-level methods? Question 10 The World Wide Web is organized around the ____ metaphor. Question 11 The list of required output reports is normally specified during the ____ phase. Question 12 Which of the following types of contracts will most likely put most of the risk on the vendor? Question 13 Which of the following is NOT an example of a technique to reduce input errors? Question 14 Documents that allow the user to click on a link and to jump to a different part of the document or another document are...

Words: 459 - Pages: 2

Cis 511 Final Exam Solutions

...CIS 511 Final Exam Solutions http://hwguiders.com/downloads/cis-511-final-exam-solutions CIS 511 Final Exam Solutions • Question 1 There is no need to re-engineer a process once an ERP project has begun. • Question 2 TQM concentrates on anticipating and preventing defects. • Question 3 BOM is alternately called, “basis of manufacturing”. • Question 4 Position control promotes planning and budgeting of personnel costs. • Question 5 Demand management forecasting is linked to both MPS and MRP. • Question 6 ERP reduces cost but promotes increases in inventory. • Question 7 One reason for ERP failures is attributed to narrow focus. • Question 8 Statistical influences related to data mining are valid for customers and employees but not employers and pubic agencies. • Question 9 Sales forecasting is used primarily to support SCM. • Question 10 Employee tracking from application to retirement is known as human capital inventory. • Question 11 Order settlement’s goals are to manage operations, quantities and dates. • Question 12 Another used for the e-business value chain is “virtual value chain”. • Question 13 MPS stands for monthly product status. • Question 14 e-Business has transformed customer2customer and supplier2supplier by virtue of data-centric transactions based on high-speed communications. • Question 15 SCM unites customers and suppliers with the intent of maximizing responsiveness, augmenting flexibility, eliminating paperwork and......

Words: 292 - Pages: 2

Cis 552 Final Exam Solutions

...CIS 552 Final Exam Solutions http://hwguiders.com/downloads/cis-552-final-exam-solutions CIS 552 Final Exam Solutions (1) Which of the following is not a virus preventative technique? (2) What is the name of a virus that changes itself when it spreads? (3) Which of the following is a piece of code or software that spreads from system to system by attaching itself to other files? (4) What type of malware attempts to trick victims into purchasing software or providing their credit card numbers? (5) Which of the following best describes what occurs when a lower-level account is cracked in order to obtain increased access? (6) Enumeration can be used to discover all but which of the following types of information? (7) Installing Netcat on a remote system by using an exploit is an example of what type of attack? (8) Which of the following best describes what occurs when a user attempts a connection to a Windows system without the standard username and password being provided? (9) What can an insecure login system provide? (10) Which of these describes a database security problem that occurs when actions of database users are not properly tracked? (11) Changing the content of a Web site with the intent of leaving a distinguishing mark or changing its appearance is __________. (12) Identifying fixes and prevention methods occurs in which of these incident response stages? (13) Which of the following properly describes an IDS......

Words: 483 - Pages: 2