Jdcw Case

In: Business and Management

Submitted By gj123
Words 1762
Pages 8
The following report is a consultation analysis of John Deere Component Works costing structure. Included is a discussion of the existing cost system as well as a comparison with the proposal of the Activity Based Costing system. The solutions to the required discussion issues have been thoroughly prepared and are hereby included.

Problem Statement:

The demand for John Deere Component Work’s (JDCW’s) products has suffered due to the collapse of farmland value and commodity prices. A number of continuous failures in JDCW’s competition for bids have placed an onus upon management to question its current costing methods. As a result, an analysis must be made regarding the current costing methods in order to determine their validity and to aid the company in adopting a more sound costing system.

Analysis

John Deere Component Works was a subdivision of John Deere and Company which dealt exclusively with the manufacturing of tractor component parts. By the mid 1980’s, JDCW found that its available excess capacity was increasing. To neutralize this problem JDCW attempted to take advantage of the efficiencies of its newly acquired automatic turning machines by bidding on parts offered from within the company. This lead to a direct bid of 275 of the 635 parts offered by John Deere and Company. Out of the possible 275 parts, JDCW was successful in the bidding of only 58 parts, which happened to be low volume parts. This became a concern for JDCW because its aim was to attain the bids that offered the higher volume parts, as to allow it to take advantage of its machine’s high volume efficiency. In reality, the problem for JDCW was not the number of bids they received, but the alarming discrepancy within its bid prices and that of its competitors. JDCW realized that something was wrong in their accounting system, and decided to review its…...

Similar Documents

Jdcw

... Analysis John Deere Component Works was a subdivision of John Deere and Company which dealt exclusively with the manufacturing of tractor component parts. By the mid 1980’s, JDCW found that its available excess capacity was increasing. To neutralize this problem JDCW attempted to take advantage of the efficiencies of its newly acquired automatic turning machines by bidding on parts offered from within the company. This lead to a direct bid of 275 of the 635 parts offered by John Deere and Company. Out of the possible 275 parts, JDCW was successful in the bidding of only 58 parts, which happened to be low volume parts. This became a concern for JDCW because its aim was to attain the bids that offered the higher volume parts, as to allow it to take advantage of its machine’s high volume efficiency. In reality, the problem for JDCW was not the number of bids they received, but the alarming discrepancy within its bid prices and that of its competitors. JDCW realized that something was wrong in their accounting system, and decided to review its current cost structures. The existing cost system is strong in that it is simple and easy to maintain. Overhead allocation was based on direct labor hours, machine hours and material dollars. The use of standard costs allows JDCW to compare actual labor overhead costs with budgeted rates in order to determine the following years’ overhead costs. In fact, the old cost structure worked quite well in the past since the...

Words: 1761 - Pages: 8

Case

...CPET 575 Management of Technology Technological Innovation Case I-1 Elio Engineering, Inc Lecture Note & Summary by Professor Paul I-Hai Lin Pages 13-31 of Text Book: Robert A. Burgelman, Clayton M. Christensen, and Steven C. Wheelwright, Strategic Management of Technology and Innovation, 5th edition, McGrawHill, 2009. Case I-1 Elio Engineering Inc. 1 Outline       Origin of Elio Engineering Seat Mechanism Technologies Industry and Regulatory Environment Technological Barriers and Risks Capabilities Requirements for Players in Automotive Seats and Comparative Company Profiles Decision Time Case I-1 Elio Engineering Inc. 2 1 Origin of Elio Engineering Paul Elio  Hari Saknkara   Technical Capabilities • JCI Benchmarking Department • JCI Structural Design and Analysis Department 1996 -1998 • A patent: revolutionary bike design • Failed venture   Technical Capabilities: 1988 – 1997, JCI’s Structural Design & Analysis Department MBA training 1998 Summer Intern at Booz Allen Hamilton, a management consulting firm  Feb. 1998 • A new seat design “No Compromise”  Feb. 1999 Case I-1 Elio Engineering Inc. 3 Origin of Elio Engineering 1998  First venture meeting: Paul & Hari, at Venice, CA  Agenda • ABTS (All-Belts-To-Seat) • Announcement & comments  A cost effective new seat design - a special class of ABTS Utilizing new technology Resulting structure: Low cost, Light weight, Strong • Features ...

Words: 3130 - Pages: 13

Case

...case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case case......

Words: 3640 - Pages: 15

Case

...Join now! Login Support Other Term Papers and Free Essays Browse Papers Business / Timbuk2 Case Study Timbuk2 Case Study Term Papers Timbuk2 Case Study and over other 20 000+ free term papers, essays and research papers examples are available on the website! Autor: santhanam.vikram 09 December 2013 Tags: Words: 723 | Pages: 3 Views: 86 Read Full Essay Join Now! CASE STUDY: TIMBUK2 1.) Consider the two categories of products that Timbuk2 makes and sells. For the custom messenger bag, what are the key competitive dimensions that are driving sales? Are their competitive priorities different for the new laptop bags sourced in China? Some of the competitive advantage which are the key factors of Timbuk2 bags are:-  Quality  Durable  Reliable  Not prone to defects  Custom made bags for each of the customers  The quick delivery of bags  The rave review which the company gets for its bags i.e. it basically carries a good name in the market  For its laptop bags, even though they are manufactured in china, the designing is done in San Francisco. so the exclusivity remains  Cost effective manufacture of laptop bags in china  Being able to adopt to changes in demand and fashion By manufacturing the bags in china the company saved the manufacturing cost but lost their niche of manufacturing and selling in America itself. The general perception of it being a Chinese product led to customers felling......

Words: 564 - Pages: 3

Case

.../InstructorResourceManual.pdf‎ The case was prepared by Mark S. Beasley, Ph.D. and Frank A. Buckless, Ph.D. of North Carolina State University and .... Case 1.1: Ocean Manufacturing, Inc. Ocean Manufacutring Inc The New Client Acceptance ... www.studymode.com/.../ocean-manufacutring-inc-the-new-client-accept...‎ Ocean Manufacturing, Inc.: the New Client Acceptance Decision: Case 1.1 Ocean ... Problem Solution: Harrison-Keyes Inc. Ayodeji Ajayi University of Phoenix ... Ocean Manufacturing, Inc.: The New Client Acceptance ... www.freecasestudysolutions.com/case-study-Ocean-Manufacturing-Inc-...‎ Case 1.1 Ocean Manufacturing, Inc.: The New Client Acceptance Decision Ocean Manufacturing, Inc. is recommended as a ... ORDER NEW SOLUTIONS ... Solution Manual for Auditing Cases An Interactive Learning ... testbanksfor.com › All test banks and solution manuals‎ Download Solution Manual for Auditing Cases An Interactive Learning Approach 5th Edition by Beasely. Solution Of Ocean Manufacturing Inc Free Essays 1 - 30 www.papercamp.com/group/solution-of-ocean-manufacturing.../page-0‎ Free Essays on Solution Of Ocean Manufacturing Inc for students. ... ACCT 805AE Case 4 Ocean Manufacturing, Inc The Osprey Group Feb 21, ... Auditing: r c aSe S t h at diSc uSS topicS rel ated to thiS Section 1.1 Ocean Manufacturing, Inc. . Case 1 1 Ocean Manufacturing Inc Free Essays 1 - 30 www.papercamp.com/group/case-1-1-ocean-manufacturing-inc/page-0‎ Case 1.1 Ocean Manufacturing, Inc.:......

Words: 447 - Pages: 2

Case Study

...John Deere Component Works Background: John Deere Component Works (JDCW), subdivision of John Deere and Co, was in charged specifically of the manufacturing of tractor component parts. The demand for JDCW’s products had problems due to the collapse of farmland value and commodity prices. By the mid 1980’s, JDCW found that the available excess capacity was increasing, it decided to take advantage of the efficiencies of the newly acquired automatic turning machines by bidding on parts offered from within the country. But ultimately, JDCW only bid successfully for 58 parts out of 275 parts, worse still, the 58 parts were all low volume parts, contrary to its aim to attain the bids that offered the higher volume parts. The failure in its competition for bids made management question about its current costing system. As a result, we have to analyze the current costing methods to determine the validity and to help the company adopt a more reasonable costing system. Assignment Questions: Q3: JDCW was established as the subdivision of John Deere Company during the 1970’s when the demand was increasing. JDCW had been structured to be a captive producer of parts for Deere’s equipment divisions, particularly tractors. During the mid 1980’s, the Gear and Special Products Division of JDCW decided that the complex machined parts would make full use of the excess capacity, then more automated machines developed leading to the increased manufacture overhead costs. As a result, the......

Words: 901 - Pages: 4

Case to Case

...CASE STUDY 2 I. THE ARALIN TEACHER Mrs. Boots De Vola was assigned to teach the first section in third year level. She assumed that she is an effective and efficient teacher in Araling Panlipunan because of that. There are many teachers qualified and much deserving to teach the star section. Now, the students are complaining of the expenses regarding projects, special projects and the way she behave in classroom. II. HISTORY AND BACKGROUND OF THE FACTS Mrs. Boots De Vola have underwent the process of being LSB teacher, PSB teacher, before she was declared as regular teacher in Banana National High School. It has been five years that she handled Aralin in section one. There are congruency on each year complaint but since the students are afraid of failing her subject they remained quiet. I seldom hear news about her projects and the money she collected from her advisory class. Every single mistake has an specified amount to be collected as fine, but the students don’t know where these money will be spent. Another concern about Mrs. Boots De Vola is the way she handled and treated her students. She always nag and shout to students, for her it’s the way of disciplining her students. Some of the students chose to dropped schooling because they felt being degraded and they do not have money for everyday fine. Lately, a mother asked her about the special project of her son amounting one hundred thirty pesos. The project was properly discussed, but we found out that......

Words: 699 - Pages: 3

Jdcw Hbr Case Study

...(A) A.1. How did the competitive environment change for the John Deere Component Works between the 1970's and the 1980's? What information must management accounting systems provide to support effective decision-making in these different environments? The change in the competitive environment greatly influenced JDCW. The early 70s were the end of the post WWII boom period, during which time JDCW was expanding its operations and operating many of its manufacturing plants at capacity. However, there were multiple economic factors in the early 80s that negatively affected the demand for JDCW products. The effect of these economic factors is evidenced in the case study by the fact that during the 1970s JDCW’s operations and equipment had been arranged to support tractor production of 150 units per day and by the mid-1980s, JDCW was producing parts for less than half of that number. One of the reasons for this negative demand shock was the collapse of farmland values and commodity prices. This left farmers with little capital through which they could purchase farming equipment. The collapse of land values had two effects. First, it caused the demand for JDCW equipment to shrink because farmers were no longer aggressively expanding. Secondly, the foreclosure of farms led to an increased supply of repossessed equipment that further reduced the market demand for JDCW’s new equipment. Additionally during this time, the high dollar value reduced U.S exports, which hurt......

Words: 1604 - Pages: 7

John Deere Case

...1. What are the Strengths and Weaknesses of the existing cost system at JDCW? The Weaknesses are as given below: • The current costing system followed at JDCW is not effective for individual parts bidding and costing. • The allocated Machine Hours are not supported by the product unit which thus leads to improper allocation of costs. • By using only three overhead rates the current costing system doesn’t calculate the true production costs as the other activities of the production process are not taken into consideration. • The current costing system doesn’t compute material variances which doesn’t honor the accuracy of the costing structure. For more accurate measure, the variance calculations should be included in the weekly report. • The costing system has not been changed or modified since its inception. Initially it was designed for direct labor intensive production process with minimal overhead costs. Now the company has changed its production process to automated system which has increased the overhead costs. The increase in overhead costs is due to more supervision, maintenance etc. • Using the current costing system the JDCW management continually under-costs its low volume parts and over-cost its high volume parts. The Strengths are as given below: • The existing system is strong, simple and easy to maintain. The allocation of overhead is done on the basis of direct labor and direct machine hours. • The existing system was working satisfactorily...

Words: 913 - Pages: 4

Case

...A Guide to Case Analysis I keep six honest serving men (They taught me all I knew); Their names are What and Why and When; And How and Where and Who. — Rudyard Kipling 2 A Guide to Case Analysis In most courses in strategic management, students use cases about actual companies to practice strategic analysis and to gain some experience in the tasks of crafting and implementing strategy. A case sets forth, in a factual manner, the events and organizational circumstances surrounding a particular managerial situation. It puts readers at the scene of the action and familiarizes them with all the relevant circumstances. A case on strategic management can concern a whole industry, a single organization, or some part of an organization; the organization involved can be either profit seeking or not-for-profit. The essence of the student’s role in case analysis is to diagnose and size up the situation described in the case and then to recommend appropriate action steps. Why Use Cases to Practice Strategic Management? A student of business with tact Absorbed many answers he lacked. But acquiring a job, He said with a sob, “How does one fit answer to fact?” The foregoing limerick was used some years ago by Professor Charles Gragg to characterize the plight of business students who had no exposure to cases.1 The facts are that the mere act of listening to lectures and sound advice about managing does little for anyone’s management skills and that the accumulated managerial......

Words: 7354 - Pages: 30

Case

...CASE STUDY OUTLINE Case studies should generally subscribe to the following organization: • Title. A thoughtful title that captures the essence of the case study. • Abstract. (or Summary) A one- or two-paragraph statement summing up the study (what, why, when, where, how, and who). This summary introduces the project, questions, hypothesis, and highlights of the important findings. • Introduction. (or Background). Describes what you did, and why it was of interest—opens the door to the case study and tries to get the passersby to enter. Typically several paragraphs, the introduction includes background information about the building/space, the designer's intent, the myriad of interesting topics to study, what sparked your team's curiosity, and how the team decided on the topic. • Hypothesis. (or Hypotheses). Presents the hypothesis (or hypotheses) that is the basis of your investigation, describes the question(s) that led to development of the hypothesis, and explains why the hypothesis was framed as it was (technical background, design interest, occupant concerns, etc.). Include a series of inquiry questions that would logically help you substantiate or refute the hypothesis. These will logically serve as stepping-stones for the methodology. • Methodology. Describes the step-by-step procedure employed and explains why it is appropriate to this case study, provides details of how, what, when, where, and who. It should......

Words: 420 - Pages: 2

Jdcw Cost System

...____________________________________________________________________________ JDCW is facing competition from vertically integrated companies, independent machine shops, limited range of services, internal bidding issue and geographical pricing issues. The importance of identifying and eliminating cost correctly is vital to the success of the company. With the current cost system (Exhibit A), the company uses three overhead rates that creates a large variation in quotes for parts, did not identify the low-volume and low-value parts, relied on past cost without identifying mistakes and established a “normal value” as a long term “through the business cycle” volume. With the ABC cost system (Exhibit B), we address the limitations of the last system being ineffective for costing and bidding individual parts by allocating the cost to 7 activities, establishing overhead rates based on machine size, calculating material cost in order to compare trade off cost, and creating a par value instead of using “normal volume”. In addition, our old system relied on past year’s charges and did not accurately identify potential changes for following years. However, we have identified that products with high direct labor, volume, machine hours are helped by the new system and those with low volume, direct labor and machine hours are hurt. Based on the model we received insight into cost trade-offs among various products (Exhibit C), and determined we should manufacture more......

Words: 401 - Pages: 2

Case

...Assignment Questions for Harvard Cases 3. Hilton Manufacturing Company In Exhibit 3 of the case, change the description for estimating variable portion of "Compensation" and use 5% of direct labor cost rather than 5% of direct labor and indirect labor cost as indicated in that Exhibit 3. Again, DO NOT USE 5% of DL and IDL costs. A product cost is itself a product of a cost accounting system. To use product cost information in decision making, a manager must understand the nature of the cost measurement system that has been used to estimate a product cost and be able to evaluate whether or not the product cost at hand is appropriate for the decision which is about to be made. A second objective is to provide practice in considering whether or not assumptions about cost behavior are critical to decisions and to expand the notion of contribution beyond the simple idea of price minus variable cost per unit. A third objective introduces the concept of breakeven analysis, not by focusing on the point where no profit is earned but rather as a tool to consider whether or not one of two price points might be preferred. Finally, the last assignment question invites you to consider factors that lead to profitability. You begin your analysis by focusing on two issues raised in the assigned questions. The first is whether the decision not to drop Product 103 as of January 1, 2004 was wise. In addition, you are asked to analyze what would have been the impact on......

Words: 1312 - Pages: 6

Case

...A few tips from Bain & Company: • • • • • Don't get thrown by the interviewer's questions. The interviewer is your ally and uses questions to get a better understanding of your thought process--not to stump you. Be concise. If asked for the top two issues, confine your response to two items. Provide logical back-up for your answers. Be sure to explain what case facts led you to a conclusion, and how you reasoned from those facts to your conclusion. Don't be afraid to ask clarifying questions. If you don't understand the case facts, it will be tough to ace the interview. Relax and have fun. You should learn a lot about yourself through the case interview process. A few tips from Mercer Management: • • • • There is no "right" answer. We are not looking for a specific answer. We are trying to gain some insight on your thought process. Ask questions. We do not expect you to know anything about the industry presented in your case. We do expect you to ask good questions. Think out loud. The point of the case interview is to understand how you think. Structure your answer. We're looking for an organized pattern of thought to attack the problem, not a disparate set of ideas. Help us see how you order your thoughts and ideas, moving from one to the next in order to address the question. While use of a framework may be helpful in this area, be careful if you use one. We want to understand your thought process, not see that you've memorized someone else's framework. (And never use a......

Words: 382 - Pages: 2

Case Case

...Case Analysis - FPL Energy FPL Energy is one of the nation’s leading independent generators of electricity. Dedicated to generating clean energy, 80 % of its capacity is fueled by clean and renewable resources. The United States is the nation with the largest generator of wind energy, and it operates the two largest solar fields in the world. FPL Group, with annual revenues of more than $8 billion, is one of the nation's largest providers of electricity-related services. Its principal subsidiary, Florida Power & Light Company, serves approximately 3.9 million customer accounts in Florida. FPL Energy, LLC, and FPL Group energy-generating subsidiary, is a leader in producing electricity from clean and renewable fuels. 2. Historical Overview FPL Group is a far different company today than the one Jim Broadhead joined in January of 1989 when he became president and chief executive officer. FPL Group was then engaged in a number of businesses unrelated to its core electric skills, including insurance and financial services, real estate, cable television, and agriculture. The company's principal subsidiary, Florida Power and Light, was considered a well-managed utility with an emphasis on quality. However, the utility's spiraling costs had resulted in electric rates among the highest in the Southeast. Today, FPL Group is nationally known as a high quality, efficient, and customer-driven organization focused on energy-related products and services. With a......

Words: 3471 - Pages: 14