Petronas R&D

In: Science

Submitted By qafi
Words 932
Pages 4
INTRODUCTION

Petroliam Nasional Berhad (PETRONAS) is an oil company in Malaysia. PETRONAS was found on 17th August 1974. Wholly owned by the Government of Malaysia, the corporation is vested with the entire oil and gas resources in Malaysia and is entrusted with the responsibility of developing and adding value to these resources.
Over the years, PETRONAS have gained unique experience and expertise in nation building and this, coupled with our technical and operational competencies have allowed PETRONAS to be increasingly accepted as the preferred strategic partner by international companies and the host countries where we operate. This augurs well for the realization of our vision to become a “Leading Oil and Gas Multinational of Choice".
PETRONAS was not the first company to extract oil or gas in Malaysia. It was Royal Dutch Shell that began the oil exploration in Sarawak, then under the White Rajahs, at the end of the 19th century. In 1910, the first oil well was drilled in Miri, Sarawak. This became the first oil producing well known as the Grand Old Lady.
Shell was still the only oil company in the area in 1963, when the Federation of Malaya, having achieved independence from Britain six years before, united with Sarawak and Sabah, both on the island of Borneo, and became Malaysia. The authorities in the two new states retained their links with Royal Dutch Shell, which brought Malaysia's first offshore oil field on-stream in 1968.

RESEARCH AND DEVELOPMENT (R&D)

R&D refer those investigate activities leading to the discovery of knowledge (research) and the translation of this new knowledge into marketable product development. Objective of R&D: a) To create or design new products or services b) To find new uses of existing products c) To develop new processes that will help reduce capital and manufacturing cost d) To…...

Similar Documents

Discussiont Question R&D

...about R&D costs. FASB ASC 730-10-20 demonstrates the definition of research and development. FASB ASC 730-10-05 stipulates general accounting arrangement to R&D cost. In general, most R&D costs are expensed in the periods incurred, because (1) R&D costs entail a high degree of uncertainty regarding the amount and timing of future benefits, and (2) R&D costs are difficult to match with future revenues due to a lack of direct relationship between R&D costs and future revenues. To determine the treatment of following costs incurred in 2013: a. Salaries of administrative personnel According to ASC 730-10-25-2(b), personnel salaries engaged in R&D activities shall be included in R&D costs. Based on ASC 730-10-25-2(e), a reasonable allocation of indirect costs also shall be included in R&D costs. However, general and administrative costs that are not clearly related to R&D activities shall not be included as R&D costs. According to ASC 730-10-15-4(c), the acquisition, development, or improvement of a process by an entity for use in its selling or administrative activities shall not be considered R&D costs, because such process may be intended to achieve cost reductions as opposed to revenue generation. Therefore, the salaries of administrative personnel shall be considered R&D costs and expensed in the periods incurred if they are directly or indirectly related R&D activities. Otherwise they shall not be included as......

Words: 825 - Pages: 4

Market for R&D Failures

...Rondesko, KaChun Fung, Daniel Lozano, Jose Romero Professor Pe’er Final Essay 18 December 2012 Market for Trading R&D failures Advancing ones knowledge based on past failures is vital towards furthering intellectual development. Without understanding as to why something doesn’t work, it would be very unlikely that an efficient goal can be reached. This same concept applies to research and development projects in the modern day industry. Using the knowledge of recent failures is what drives progress and technological advancements. However, discovering failures is insensitive to time, resources, and capital in an ever changing world of product innovation. If knowledge of research and development failures were known to firms prior towards their attempt, product growth would be quicker, less risky and more profitable. A market that traded intellectual failures would be beneficial towards the firm and its stakeholders while improving market efficiency. Since understanding failures is so important towards the progression and advancement of a product, there should be a market in which firms can trade R&D failures. However, this market does not exist. Yet, if we can argue that there are advantages for firms to possess more intellectual knowledge, than this market can have hypothetical value. One of the main reasons why there is currently no market for R&D trading is because it can be advantageous towards a firm’s competition even at a cost. If competitors know......

Words: 3313 - Pages: 14

R and D

...1007/s11151-006-0010-z © Springer 2006 The Determinants of Pharmaceutical R&D Expenditures: Evidence from Japan ¨ JORG C. MAHLICHa and THOMAS ROEDIGER-SCHLUGAb, Economic Policy Department, Austrian Federal Economic Chamber, Wiedner Hauptstrasse 63, A-1045 Vienna, Austria. b Department of Technology Policy, ARC systems research, Donau-City-Strasse 1, A-1220 Vienna, Austria. Author for correspondence. E-mail: thomas.roediger@arcs.ac.at a Abstract. During the past 20 years, the world pharmaceutical industry has experienced a dramatic increase in R&D intensity. We apply and extend a model developed by Grabowski and Vernon (2000, Journal of Evolutionary Economics, 10, 201–215) with a pooled data sample of the 15 publicly listed Japanese drug firms for the period 1987– 1998. As in the original study, we find expected returns to be an important determinant of R&D spending in the Japanese drug industry, albeit considerably smaller than in the U.S., which is particularly obvious in the case of returns from newly introduced drugs. However, our results are sensitive to econometric model specification, in particular to controlling for serial correlation and to a dynamic specification of the baseline model. Likewise, estimates on financial constraints are sensitive to model specification, indicating that Japanese drug firms face small or no financial constraints. Our results are consistent with the general literature on R&D investment behaviour, yet raise some methodological questions......

Words: 902 - Pages: 4

Mnc R&D in Ireland: the Medical Sector

... MNC R&D in ireland: the medical sector By Martin Ronan A Thesis Submitted for the Degree of Bachelors in Business Administration Galway Business School Research Supervisor: Dr. Johanna Fahy May 2010 Abstract Penrose (1995) states that R&D is “the deliberate investigation of the as yet unknown properties of the materials and machines used in production (or as yet undeveloped ways of using them) for the express purpose of improving existing or creating new products and productive processes”. (p112) This study explores the level of R&D in the medical sector in Galway, because R&D is seen as of paramount importance to the sustainability of the sector in the West of Ireland. Galway, in particular, has become a nucleus for the medical sector with a considerable number of companies operating there (Fitzgerald, 2007; Stommen, 2005; Harvey, 2001). The research was conducted using primary research methods and additional information was acquired through extensive literature review. Qualitative interviews were conducted with senior R&D professionals to ascertain the degree of penetration of R&D practices in the sector. The findings of the research suggested that a high level of R&D exists in the sector and that its importance is valued by policymakers. The four companies interviewed all demonstrated high levels of R&D......

Words: 10944 - Pages: 44

Toyota R&D

...high-quality products for customers throughout the world. The intellectual property that R&D generates is a vital management resource that Toyota utilizes and protects to maximize its corporate value. R&D PRINCIPLES * Providing clean and safe products and enhancing the quality of life of people everywhere through all our activities. * Pursuing advanced technological development in a wide range of fields, we pledge to provide attractive products and services that respond to the needs of customers worldwide. In fiscal 2012, R&D expenses totaled ¥779.8 billion, up 6.8% from the previous fiscal year, representing 4.2% of consolidated net revenues. The company has been constantly increasing its total revenues as it grows older. We worked closely with suppliers to develop components and products more efficiently and took steps to reduce our own R&D expenses. At the same time, we plan to continue making substantial investments in R&D involving forward-looking, leading-edge technologies and the development of products associated with the environment, energy, and safety. These investments are essential to preserving our competitive edge in terms of technologies and products. INTELLECTUAL PROPERTY STRATEGIES Toyota carefully analyzes patents and the need for patents in each area of research to formulate more effective R&D strategies. We identify R&D projects in which Toyota should acquire patents, and file relevant applications as......

Words: 337 - Pages: 2

Proton R&D Plan

...Proton R&D Plan Storage Ring EDM Collaboration, 18 Nov. 2009 7. Spin Coherence Time (C.J.G. Onderwater) Overview The sensitivity with which an EDM can be sought for is to a good approximation given by sd ∝ 1 PE N T tot A Here P is the (transverse) polarization of the beam at the time of injection, E the effective electric field, N the number of particles stored per fill, Ttot the total running time of the experiment, τ a characteristic time scale and A the analyzing power of the polarimeter. The characteristic timescale depends on the lifetime of the beam in the storage ring, tbeam, which is predominantly determined by the extraction towards the polarimeter, and the polarization lifetime tpol. Given a polarization lifetime the former can be tuned to yield optimal sensitivity, typically tbeam≈2tpol. In this case τ is proportional to tpol. The sensitivity is thus inversely proportional to (the square-root of) the polarization lifetime. Maximization of tpol thus optimizes the sensitivity of the experiment. The proposed experimental sensitivity is based on a projected polarization lifetime of 1000 seconds, i.e. 108−109 particle revolutions. Such lifetimes are routinely achieved for the polarization component perpendicular to the beam orbit plane, i.e. parallel to the invariant spin field. This relies on the use of snakes, spin rotators, etc. Little experience is available with transversely polarized beams. Notable examples are the muon g-2 experiment at......

Words: 2923 - Pages: 12

Accounting R&D

...Why companies investing in R&D Slide 2: It’s hard for companies to stay competitive to their competitor in their industry if they can’t hold the latest and most innovative technology. So investing in R&D helps companies stay competitive Business performances: statically, in a survey in Canada in 2007, 44% of ideas of innovation come from the source of R&D. Thus, R&D help improve business performance. Slide 3How companies in US and the world are investing in R&D? In US, for the year 2014 to come, US companies are expected to spend $ 465 billion into R&D activities; it means 2.7% percent of US GDP. On the Europe side, company like Volkswagen spends $13.5 billion, Novartis spends $9.9 billions. That’s huge amount of money, thus it requires an appropriate accounting treatment for these costs. Slide 4: Both US GAAP and IFRS recognize the importance of appropriate accounting treatment for R&D activities but take a different viewpoint on the method should be used. It’s clear that if future economic benefit gonna flow into the entity as the result of R&D activities. These cost should be classified as asset rather than expense. But whether future economic benefit are certain to flow into entity are impossible to predict. Thus the difference between GAAP and IFRS arise Slide 5: Talk about how US GAAP account for R&D cost. The accounting standard here is ASC 730- Research and development. ASC 730 defines what is research and development. Types of R&D activities falls under......

Words: 919 - Pages: 4

R&D Report

...in each region. 3) The competence of Custom Sale depends on the number and competence of FAE and Sale people 4) The trend and conditions of the economic growth/ crisis. 5) Internal production capability, Inventory, R&D level, etc. 6) Competitor’s decision, production, generations and pricing. 7) Market research index, Brand Awareness index, Customer Satisfaction index, Solution index regulated the Sales in each region. 2. What was the company strategy and Marketing & Sales direction? The company strategy is illustrated clearly on the following balance scorecard Mission: Deliver most advanced (Customs) and most affordable products (Components) globally. Goals Finance Increase shareholder Value KPI Effected by department Requirement By when Action EVA, Share Price Company 1 mln Above 35 eur Comp. 200 mln Custom 200 mln 300 mln Comp. 40% Custom 45% 10% Q6 All period s Profitability, R&D, brand image Increase profitability Segment results, Net Profit, CM Company Q6 Cost optimisation High asset utilization Customers ROCE=Turnover/ Total assets Company Q6 Increase sales Best pricing CM, Price Range Marketing & Sales See profitability Comp. 5% lower than competitors 20% No runouts Actual=planne d Q6 Cost optimisation Availability of goods Production Capacity, Inventory, Sales Corp. Image Index, Cust. Satisfaction Index, Market knowhow index Quarte rly Quarte increase rly quarte rly All quarte......

Words: 3164 - Pages: 13

Overview of R&D Evaluation- Accounting

...[Overview of R&D Evaluation Methods] 4/27/2015 Strategic Cost Management 1 Background- Strategic Management in R&D • Traditionally R&D Division in any company as been a part of Company’s overhead. • The investment in R&D has been strategically planned to be an “X”% of the sales or the profits achieved by the company. • The financial Matrix for an R&D organization has been poorly defined. • With recent stress on innovation, R&D is back in focus. • A lot of cost cutting measures and Product differentiation methods are now being tracked through R&D divisions through out USA. 4/27/2015 2 Benefits of R&D evaluation programs • Generate additional important information for continuous product improvement. • Document knowledge base and prevent silo operation. • Document research model to prevent repetition of previous unsuccessful models. • Develop systematic cost effective model . • The focus of R&D evaluation program would be on non-financial strategic allignment. 4/27/2015 3 R&D Evaluation programs: NonFinancial benefits • Increase overall efficiency and quality of an research program • Align R&D focus with the corporate strategic goal. • Promote innovation • Co-relate past efforts with the future to reduce down time. 4/27/2015 4 R&D Evaluation programs: NonFinancial benefits • Increase overall efficiency and quality of an research program • Align R&D focus with the corporate strategic goal. • Promote......

Words: 1140 - Pages: 5

European R&D

...assistant can give you my mobile number. All the best and see you soon, Evie EPSO  Mock Case Study Exercise Published: 15.04.200X-3 AD5 Audit European R&D Office News A lway s surprising Special Newsletter of the European Reconstruction & Development Office F ollowing the conflict in Former-Yugoslavia the EU established the ERDO in 200X-8. In doing so the EU demonstrated its determination to respond to the needs of the Balkan Region: to rebuild after the damage caused by conflict, to stabilise the region and to support governments with democratic reforms. T he ERDO quickly gained a reputation for efficiency. Its mandate was progressively extended to the whole region. This newsletter celebrates the 5th anniversary of the agency! Some facts and figures S ince 200X-8, the ERDO has been entrusted with a €2.85 billion investment portfolio. To date, more than €2.58 billion (or >90%) of that amount has been contracted and €2.24 billion (or ca 78%) paid out. A s needs quickly evolved, the EU’s support shifted from early emergency work to projects designed to support the reform and modernisation of public institutions. The past five years, the ERDO has provided assistance in virtually all areas of public and business life, from government administration and economy, to justice, civil society and the media. Small revolutions R eform processes are not merely words bandied about by bureaucrats in Brussels, they do make a real difference on the ground. Reform is......

Words: 5563 - Pages: 23

Capital Allowance for R & D

...successful achievement of this target there has to be structural changes in terms of skills, manpower, types of industries to be promoted (high-tech instead of low level production), Research & Development etc. tax incentives had been one of the methods used to encourage this growth and development. You have been asked to give your views with respect to incentives that are currently available (in terms of capital allowances) and those that can be introduced to developed highly skilled manpower to cater to the needs of both the services and the manufacturing sector. Research and Development(R&D) is an advancing technology,diversifying a product line and growing a business.R&D enables businesses to develop new processes and products.R&D Tax Credits allow businesses for reduction of tax for qualified expenditures.Business can claim tax credits up to 3 years and defer taking credit for up to 20 years.R&D tax credits not only rewarded for the final product,but all the changes,differences and experiment involving the final result.Capital allowances are atax relief available to a tax payer who incurs on certain expenditure within a commercial property,regardless of age,requirement or interest held.Capital allowances reduce the amount of tax paid.To trade and to demonstrate ownership the taxpayer must be using the qualifying assets. Qualifying expenditure on plant and machinery will be the apparatus used for carrying on business is “plant” and a mere part of the used for......

Words: 562 - Pages: 3

Government R and D

...I. BRIEF SUMMARY Military research and development is of great importance to the country’s security and the well-being of the nation’s economy. In the recent year, the amount spend by the United States on these kinds of projects has already doubled. This R & D is done by different companies in the industry for the government. Now, there is this proposal to have the companies focus on a specific development to get the most out of the money spent by the government considering the existence of competition among these companies, specifically on duplication and interservice competition related to military R&D projects. II. SITUATIONAL ANALYSIS III. STATEMENT OF THE PROBLEM With the budget of the military aspect of the government a certain problem arose, especially on the matter of finances in relation to the research and development of military weapons. These issues include the matter on how to eliminate duplication and interservice competition among the developers; the idea of focusing only on a certain project and how this can possible affect the quality of the weapons; and the existence of private researches in the industry military R&D. How should the government act upon this situation given also that there is this tremendous industrial importance in military research endeavours? IV. ALTERNATIVE COURSE OF ACTION ALTERNATIVE 1: Development and Planning of a Specific Research in Coordination with the Military Planners Pros: * Proper......

Words: 781 - Pages: 4

From in-House to Joint R&D

...From In-house to Joint R&D: The Way forward for Nokia Denmark Harvard Case Solution & Analysis The case describes and discusses the organizational and strategic challenges of outsourcing research and development (R & D) activities from Denmark to China. Nokia Denmark was founded in 1996 as a subsidiary of Nokia and contained the largest Nokia R & D division, focusing on the development of mobile phones outside of Finland. In 2007, Nokia Denmark received instructions from corporate headquarters to dramatically increase the number of mobile phone. Guided by the need to release the pressure on its internal capacity, Nokia Denmark decided to outsource certain projects of product development Taiwanese company Foxconn in joint R & D (USC) plant. Foxconn, one of the world’s largest electronics manufacturers, who are also developing products for many of the competitors Nokia, was responsible for the development and testing of selected standardized and less sophisticated mobile phones, while the more complex and sophisticated technological projects were kept in the house . However, by 2010, Foxconn has become a central figure in Denmark Nokia product development with responsibility for more complex projects. Given the growing importance of Foxconn for Nokia Denmark, growing pressure from corporate headquarters and the competitive environment of the market for the products and costs, Nokia Demark way to the central question of how to proceed with the USC. Three alternatives have been......

Words: 273 - Pages: 2

R&D Director

...hàng Th gi i Ban Nông nghi p và Phát tri n Nông thôn Xu t b n l n u và ng t i trên web t i: Ngân hàng Qu c t v Tái xây d ng và Phát tri n Ban Nông nghi p và Phát tri n nông thôn 1818 H street, N.W Washington, DC 20433 M CL C L i nói u Thu t ng vi t t t Tóm l c n i dung B I C NH CHUNG NH H NG C A KH NG HO NG CÀ PHÊ CÁC TH CH CÁC DOANH NGHI P NHÀ N C TÍN D NG MÔI TR NG XÃ H I C NH TRANH, TIÊU CHU N VÀ KH N NG S N XU T GIÁ TR GIA T NG TRONG XU T KH U VÀ TH TR NG TRONG N C CÁC V N CHÍNH SÁCH QU N LÝ VÀ PHÁT TRI N KHU V C T NHÂN NG T I GIÁ C TR! C P VÀ TÁC PHÂN TÁN R I RO GI I THI U V BÁO CÁO 1. TÌNH HÌNH CHUNG V VI T NAM VAI TRÒ KINH T C A NGÀNH CÀ PHÊ I V I KHU V C NÔNG THÔN VÀ QU C GIA L CH S" PHÁT TRI N NGÀNH CÀ PHÊ C A VI T NAM Phát tri n c#a khu v c t$ nhân trong ngành cà phê Các s li u th ng kê trong ngành cà phê 2. TH CH CÁC CHÍNH SÁCH C A CHÍNH PH TÁC NG N KHU V C CÀ PHÊ NH TH NÀO Vai trò c#a các doanh nghi p nhà n$%c Các công ty tr&ng cà phê Các công ty xu t kh'u cà phê Quy (nh và thu : Chính ph# và khu v c t$ nhân Quy n s) h*u b t +ng s n và s, d-ng t KHUÔN KH. TH CH CÁC D CH V KHUY N NÔNG Các c/ h+i phát tri n khuy n nông trong s n xu t cà phê Các nghiên c0u và kh n ng h*u d-ng c#a chúng t%i các nhu c u hi n t i CHI PHÍ GIAO D CH, GIÁ C VÀ C NH TRANH Thông tin th( tr$1ng và chi phí giao d(ch Giá c trong n$%c và c nh tranh Th c thi h2p &ng và r#i ro 3. C U TRÚC NGÀNH CÀ PHÊ S PHÁT TRI N C A CUNG Di n tích tr&ng cà phê K3 thu4t s n xu t QUY MÔ CÁC NÔNG TR NG......

Words: 67886 - Pages: 272

Global R&D

...GLOBAL R&D GLOBAL R&D I. Introduction Many have noticed that functions previously held in Western countries are now being transferred to countries with cheaper labor such as IT support now done in India (neoIT, 2007) and the People’s Republic of China is nowadays by some referred to as ‘the factory of the world’ (Chang 2006). China’s WTO accession accelerates the trend giving hope for a greater market access and a more predictable commercial environment. In 1984, 3M established its China branch and was the first foreign-invested enterprise established outside the Shenzhen special economic zone. Then, the US multinational 3M Company developed its business and worked on developing a research and development (R&D) center in Shanghai like many other MNCS (158th set up in Shanghai by multinationals). Recently, 3M even doubled its China's R&D center size and staffing, giving birth to an important R&D hub for 3M's global business enabling the company to better supply products needed in the industries of electronics, telecommunications, automobiles, shipping, aviation, medical care, housing and leisure," company officials said. Today, 3M has 11 companies and 19 offices across the country, employing more than 5,000, showing a long-term commitment for the Chinese market. Through those trends, we can notice how R&D is now important in the globalization process. Li-Hua and Khalil (2006) argue that the international business environment is......

Words: 3444 - Pages: 14