Quality Control & Project Management

In: Business and Management

Submitted By arizirfan
Words 1816
Pages 8
Many failed projects today can be attributed to poor or total neglect of quality standards through lack of Quality control. Quality control, when implemented in a project, helps in yielding profit because the output is usually of great standard whereas when omitted, unavoidable losses are incurred.
A project is said to be complete when the output not only conforms to pre-defined requirements but also to quality standards of the category it falls in. e.g.
Standard for Quality Management Systems ISO 9001:2000
Automotive: ISO/TS 16949:2002
Energy: PC 242-ISO 50001
Food Safety: ISO 22000:2005
Medical Devices: ISO 13485:2003
Risk: ISO 31000
According to the ISO 8402-94 standards, “QUALITY” could be defined as “The set of characteristics of an entity that gives that entity the ability to satisfy, express an implicit needs“. It further states that “The purpose of quality is therefore to provide a client with a suitable offer with controlled processes while ensuring that this improvement does not translate into additional cost.1
Quality can be defined as a state of excellence whereby a product (due to our context) is free from defects, errors and produced according to standards defined by certain standards organizations. An example is the “ISO 9001” quality management standard.

Quality Control in Project Management according to “PMBOK” (2007) “includes all activities of the overall management functions that determine the quality policy, objectives and responsibilities.
Usually carried out by a quality control department, it involves close supervision of result to ensure they conform to the stipulated quality standards and in cases of non-conformance, causes and solutions are devised to either eliminate or correct the defect. This process should also be carried out throughout the project duration. ü Its Input are: -
* Quality Management Plan derived from the…...

Similar Documents

Management Control System Project

...Management control systems provide information that is intended to be useful to managers in performing their jobs and to assist organizations in developing and maintaining viable patterns of behaviour. Any assessment of the role of such information therefore requires consideration of how managers make use of the information being provided to them. management control describes a feedback process of planning, objective setting, monitoring, feedback and corrective action to ensure that outcomes are in accordance with plans. Two attempts have been made in the past to link this framework with strategy. The first is Anthony’s ( 1965, 1988) - strategies are taken as given and management control systems motivate, monitor and report on their implementation. Another attempt to couple strategy and management control can be seen in the concept of strategic control. Strategic control has been described as a system to assess the relevance of the organization’s strategy to its goals, and when discrepancies exist, to highlight areas needing attention. My research indicates that management control systems are not only important for strategy implementation, but also for strategy formation. I define management control systems, therefore, to recognize that these systems are more than devices of constraint and monitoring: management control systems are the formalized procedures and systems that use information to maintain or alter patterns in organizational activity. Using this definition, these...

Words: 2092 - Pages: 9

Quality Control

...10 steps of quality control Providing premium online methodology 10 steps of quality control Premium online methodology KNOTs Research has been working since 1996 to develop and manage active access to households worldwide. Building on our technical knowledge pioneered in the Japanese market, we have been active in Europe since 2001. All our work is carried out in accordance with the strictest market research professional standards codes and guidelines and we only conduct surveys for the purpose of marketing research and intelligence. We maintain and update full profile information for all our members on a regular basis and also actively recruit new members to join. Keeping the membership database fresh and engaged has resulted in high response rates for every survey – typically, depending on the complexity or scarcity of the sample, or the sensitivity of the subject, this will be between 12% and 35%. We have defined and implemented a clear set of rules to ensure that quality is our highest priority and support this through regular contact with our members. Currently, we have access to more than 40 million households in over 70 countries – and manage the relationship with global consumers on a daily basis. 10 steps of quality control 1. Maintain database – reliable and up to date 2. Confirm respondent’s identity 3. Screen with strict procedure 4. Select accurately the right sample 5. Inspect and test questionnaire thoroughly 6. Use self-completion method 7.......

Words: 1632 - Pages: 7

Quality Control Management at the Master Food Plant

...Quality Control Manager at the Masterfoods Plant Statistic 300 Introduction This paper is going to present information regarding the methods, analysis, and results on basis of the five different project assessments which were conducted at the Masterfoods plant. The investigative study was conducted using sampling method and this paper analyses the five sampling studies that were conducted to identify any flaws that could have been made during the study. A speculation is also presented on the possible causes of the flaws and an explanation of how to investigate unexpected results or failed tests is also clearly presented concerning the plant and bagging process (Lenz, Schmid & Wilrich, 2012). In the presentation, a role of a quality control manager is adopted so as to provide succinct information concerning the operations of the Masterfoods plant, with consideration for the candies produced and sold in the organization. Project Part 1: Sampling Method In this study the sampling of candies in three different bags were used to collect information on the number of the different colors of candies in the bags. The colors of the candies in the bags entailed blue, orange, green, yellow, red, and brown. In this study 160 candies were used in which 38 were blue, 33 orange, 25 green, 17 yellow, 30 red, and 17 brown candies. The three bags contained a total of 53, 55, and 52 candies with all of the aforementioned colors respectively (Rubin,......

Words: 1068 - Pages: 5

Improving Quality in the Management of Property Development and Construction Projects

...IMPROVING QUALITY IN THE MANAGEMENT OF PROPERTY DEVELOPMENT AND CONSTRUCTION PROJECTS Portfolio presented on 29th October 2004 in partial fulfillment of the requirements for the degree of DOCTOR OF BUSINESS ADMINISTRATION (DBA) JOHN PANIL MIEM, PEng (Msia) Bsc. (Hons) Civil Eng. MBA (Tech. Mgmt.) International Graduate School of Management Division of Business and Enterprise University of South Australia DOCTOR OF BUSINESS ADMINISTRATION PORTFOLIO/DISSERTATION SUBMISSION SUPERVISOR APPROVAL DECLARATION Candidate Name: John Panil UniSA Candidate ID Number: 00112656C Dear Sir To the best of my knowledge, the portfolio contains all of the candidate's own work completed under my supervision, and is worthy of examination. I have approved for submission the portfolio that is being submitted for examination. 5.001) Signature: Supervi or Professor Si Heng Loke Date Signa re: Supervisor Dr Karlos Knapp Date Supported by: j (\Professor David Richards Chair, IGSM Doctoral Board of Examiners a% Date DECLARATION I hereby declare that this portfolio does not incorporate without acknowledgment any materials previously submitted for a degree or diploma in any university and that to the best of my knowledge, it also does not contain any materials previously published or written by another person, except where due reference is made in the text. Si Date: John anil Can date, Doctor of Business......

Words: 41815 - Pages: 168

Quality Control

...Quality Control Quality Control Quality Training Manual Kajohn Hillman 6/23/2014 Table of Contents I. Introduction i. History of quality Management ii. The need for Quality Management II. The Role of Leadership i. Role they play in the success ii. Firms adoption of roles and effects of nonexistent role modeling iii. Monitoring and Metrics within the quality management improvements III. General Quality Strategies and Tools i. Establishing customer expectations ii. Designing quality in iii. Defining metrics iv. Mistake-proofing v. Kaizen vi. Six Sigma IV. Quality Tactics and the Logistics and Supply Chain Functions i. What tools are applicable internally ii. What tools are applicable externally with vendors V. Week 5: Roll-Out i. A communication plan ii. Sequence of steps to get personnel trained iii. Stakeholders on board I. History Of Quality Management The history of quality management and the movement can be traced as far back as medieval times in Europe when craftsmen and tradesmen organized themselves in unions called guilds which predate the 13th century. It wasn’t until the 19th Century when the industrial manufacturers of the world adopted this model of craftsmanship. The system had its emphasis on the inspection process which started in Great Britain during the 1700’s and grew immensely during the Industrial Revolution of the 1800’s. In the 20th century these......

Words: 3307 - Pages: 14

Quality Control

...GE on Quality Control University of Texas at Brownsville October 25, 2012 Abstract Quality Control plays a major role in the success of a Company. GE is a prime example of a company implementing procedure and maintaining high quality to provide consumers what they are looking for and making every dollar count. Six Sigma and its key concepts contribute to the success of any company. Control Charts provide dominance in measuring variances and help prevent problems. Employee empowerment is another tool extremely vital to the success of a company. GE on Quality Control It is most important to assure consumers that the process for developing a product is followed accurately. The way to do this is to have quality control in a company. This is the most important aspect of the production process. The consumers should be able to visualize how the products work and that the products functions the way they are suppose too. Can a company guarantee the products meet the critical demands? By implementing quality assurance with all aspect of the production process will guarantee the products functionality and production. The company with the top of the line products in the market which all consumers know, is GE. They hold the prestige certification: ISO 1901:2008 which means that the company must preserve a well-designed quality management system in order for them to comply with acceptable business practices.1 These practices is what keeps GE above all others. . ......

Words: 1275 - Pages: 6

Quality Control

...general and application controls in a computerized information system. | 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13 | 52, 53, 54, 55, 57, 58, 59, 60, 61, 62, 66 | 2. Explain the difference between auditing around the computer and auditing through the computer. | 14, 15, 16 | 51, 65 | 3. List several techniques auditors can use to perform tests of controls in a computerized information system. | 17, 18, 19, 20, 21 | 64 | 4. Describe the characteristics and control issues associated with end-user and other computing environments. | 22, 23, 24, 25 | 63 | 5. Define and describe computer fraud and the controls that an entity can use to prevent it. | 26, 27, 28, 29, 30 | 56 | SOLUTIONS FOR REVIEW CHECKPOINTS H.1 Given its extensive use, auditors must consider clients’ computerized information systems technology. All auditors should have sufficient familiarity with computers, computerized information systems, and computer controls to be able to complete the audit of simple systems and to work with information system auditors. More importantly, auditors must assess the control risk (and the risk of material misstatement) regardless of the technology used for preparing the financial statements. In a computerized processing environment, auditors must study and test information technology general and application controls. H.2 COBIT (which stands for Control Objectives......

Words: 10310 - Pages: 42

Quality Control

...morning of the scheduled date. This project was called PC SWAP. The quality issue that the Program Manager had was there was not a budget itemized. For example, each office was allocated a certain amount of funds for their budget. The itemized budget should have consisted of the IT travel such as air, food, and transportation. There was not enough communication between each office. Although the offices were out of state there could have een some teleconference meeting to go over the process. There should have been discussions on what time the PC Swap starts and what type of training will take place once the new software and programs have been installed. On Monday, all staff returned to the office and did not know how to use their new equipment. The administrative employees were assisting with training. The management team received new printers in their office. Unfortunately, the printers were not setup, and it took some employees about a week to get their printer compatible with their computers. This causes a lot of problems because the management team sometimes has to print confidential documents. Also, another issue was that the IT did not meet with the management team to discuss what drives the employees should have access to. All employees should not have access to the finance drive and payroll. “Quality control focuses on monitoring the activities and results of the project to ensure that the project complies with the quality standards. Once the......

Words: 558 - Pages: 3

Quality Control of It Projects in an Innovative Environment

...Abstract Enhanced quality control methods are increasingly critical for IT projects, often plagued with failure as performance objectives do not align with traditional measures. This study provides theoretical and practical implications for information technology (IT) project quality control, particularly within the domains of project management and performance measurement. The data provided qualitatively and quantitatively demonstrates the criticality of enhanced project quality control in the IT industry. Analysis of alternative methods provides alternatives to the traditional method. Alternative methods have been applied and well-accepted at large organizations who realized the criticality of these measures as new products, services, and results showed significant overall improvement. Overall this study demonstrates that improving quality control methods for IT projects leads to a strong project design—a key component of project success. This study provides theoretical and practical implications for information technology (IT) project quality control, particularly within the domains of project management and performance measurement. There is “a growing disenchantment with the traditional methodology” that measures project success by approaches such as time conformance and budget adherence, prompting stakeholders and project managers to seek methods that will provide a clear analysis of project performance (Barclay & Osei-Bryson, 2008, p. 139).......

Words: 4085 - Pages: 17

Turner Construction Company: Project Management Control System

...Construction Company: Project Management Control Systems 1. What is Turner’s business strategy? Their greatest competitive advantage is providing accurate information to the owners, creating a partnership. Turner’s business strategy is to build on this partnership to ensure repeat business. They keep the customer informed on every milestone in the project and use the IOR to communicate financial updates and construction progress. They have proven time and time again that their expert management knowledge and delivery saves the developer time and money in the end. 2. What contingencies could invalidate the strategy? This strategy is compromised with how and when Turner decides to release capital. If Turner decides to release the contingency funds, they may never see them again. There is no guarantee those dollars will be committed back to the project. If Turner releases the savings to please the owner and an unforeseen problem arises; the construction company will have to use money from their earnings to cover any potential issues. This will damage the company’s profits and is in clear violation of their strategy. If Turner decides to hold onto the savings it runs the risk of upsetting the owner. This is in violation of their strategy to create a partnership with the owner. 3. Does the IOR system force managers to address contingencies? The report generates a “best-effort” prediction of the total expected cost and earning contributions of a completed project. We do......

Words: 649 - Pages: 3

Quality Project Management for Technology

...Staffordshire University & APIIT-UCTI Masters Level Case Study Date Assigned : Fri, 05-Mar-2010 Date Due : Wed, 02-Jun-2010 (before 7pm) Lecturer : Dhason Padmakumar ________________________________________________________________________ 1. Your Task • The Chief Executive officer of your organization has instructed you to create a Project Management Procedural Handbook in preparation for a series of possible software development projects that your organization is about to undertake. The handbook will be used as a guide/template for the management of projects. It should be approximately 2500 words long • The content of the handbook should be of: ▪ Practical use to you and your workplace colleagues. ▪ Ensure that your organisation’s projects are conducted with the most appropriate tools and methods to the highest possible standards. ▪ Demonstrate academic rigour based around the structure of this module and the further research that you perform. 2. The Handbook Itself • It follows that the Handbook must be of a professional standard. • To help you achieve this a suggested template has been attached as a guide for the Handbook structure. Please feel free to add or remove sections for your own handbook scenario. • You must ensure that you identify and reference the work of others. Therefore,......

Words: 1378 - Pages: 6

Project in Total Quality Management

...PROJECT IN TOTAL QUALITY MANAGEMENT (BA230) GROUP 1 BSBA-3106 Submitted By: Submitted To: Leader: Tarras, Joyce Ann Mrs. Maritess Paclita Diallo Members: Bernal, Elizabeth Francisco, Leny Generan, Geralyngen Jadulco, Anna Lizardo, Mary rose Pamutongan, Jhanisa Recaña, Edraline Rivera, Kennedy P. Togoto, Mary Jane LEADERSHIP EFFECTIVENESS • Leadership the art or process of influencing people so that they will strive willingly and enthusiastically toward the achievement of group goals. •Leadership is a way for talented individuals to share their perspectives and knowledge by influencing others. Using their own charisma and influence, leaders should have the ability to inspire others to learn more, do more and become more. — Jeet Banerjee, • Effective leaders develop a level of self-awareness and a capacity to monitor their own learning and development because they know that leadership attributes can be defined ,learned, practiced, improved and passed on to others. • An essential part of a quality improvement effort. Organization leaders must establish a vision, communicate that vision to those in the organization and provide the tools and knowledge necessary to accomplish the vision. THE FIVE......

Words: 3600 - Pages: 15

Acct 434 Week 7 Quality Control Inventory Management

...ACCT 434 WEEK 7 QUALITY CONTROL INVENTORY MANAGEMENT To purchase this visit following link: http://www.activitymode.com/product/acct-434-week-7-quality-control-inventory-management/ Contact us at: SUPPORT@ACTIVITYMODE.COM ACCT 434 WEEK 7 QUALITY CONTROL INVENTORY MANAGEMENT ACCT 434 Week 7 Quality Control Inventory Management 1. Question : (TCO 11)The four cost categories in a cost of quality program are 2. Question : (TCO 11) ________ is a formal means ofdistinguishing between random and nonrandom variation in an operatingprocess. 3. Question : (TCO 11) Which of the following is NOT one of the steps in managingbottlenecks under the theory of constraints? 4. Question : (TCO 11)Scrap is an example of 5. Question : (TCO 11) Regal Products has a budget of $900,000 in 20X6 for prevention costs. If it decides to automate a portion of its prevention activities, it will save $60,000 in variable costs. The new method will require $18,000 in training costs and $120,000 in annual equipment costs. Management iswilling to adjust the budget for an amount up to the cost of the new equipment. The budgeted production level is 150,000 units. Appraisal costs for the year are budgeted at $600,000. The new prevention procedures will save appraisal costs of $30,000. Internal failure costs average $15 per failed unit of finished goods. The internal failure rate is expected to be 3%of all completed items. The proposed changes will cut the internal failure rate by one-third.......

Words: 1579 - Pages: 7

Project Management and Control

...Department of Computing, Engineering, and Technology The Life cycle (Environmental and Economic) Assessment of Complex Building Construction Project A Critical Reference Report Project Management and Control ENGM91 Assignment 1 Name: Manoj Rajendran Student ID: 149142740 1. Introduction Environmental issue has become economically important from the civil construction project. Especially in complex building project. As the construction field in need of resources like steel, cement, and power generation, it could definitely affect the eco-friendly system. Hence the sustainability of environmental and economic assessment should be conduct in entire life cycle of building construction project (Chan-joong Kim, 2015)The economic, social development and environmental protection are the major aspects of sustainability in building industry, which represents the impact of using raw material. Moreover the developed countries like Europe and USA has the findings that building operation contributes more to greenhouse gas emissions (B. De Meester, 2008). The usage of energy intensive elements is right from the start of the building which gives more importance to the development of environmental sustainability. But it is highly concern......

Words: 3177 - Pages: 13

Project Budgeting, Procurement, and Quality Integrated Change Control Plan

...Masters in Information Technology Project Management Project Budgeting, Procurement, and Quality Integrated change Control Plan TS5332 Project Budgeting, Procurement, and Quality Instructor: Thursday, July 14, 2016   Contents Triplicty Events Integrate Change Control Plan 1 Plan to Setup Change Control Board (CCB) 1 Category 1. Changes to Project Objectives 1 Category 2. Forced Modification of Scope 1 Category 3. Possible Modification of Scope – 1 Plan to Review and Approve Requested Changes 3 Change management process 4 Change Request Process Flow Requirements 4 Change Request Form and Change Management Log 5 Plan for Managing Approved Change Procedures 5 Evaluating and Authorizing Change Requests 6 Types of Change Requests 7 Status of Change Requests 7 Plan for Corrective and Preventative Action Procedures 8 Overview of CAPA 8 Corrective and Preventative Action Procedure 8 Plan for Areas that Needed to be Updated After Approved Changes Are Implemented 10 Plan for Controlling Project Quality from Standards Based on Quality Report Procedures 10 Control procedures 11 Control methods 11 Quality procedures 11 References 12 Triplicty Events Integrate Change Control Plan Plan to Setup Change Control Board (CCB) Change requests are inevitable in any project. In order to effectively manage the changes for the Triplicty project, a change control board (CCB) has been devised to review and prioritize changes presented......

Words: 2261 - Pages: 10