Gainesboro Machine Tools Corporation Teaching Note

  • The Use of Computer in Teaching Economics

    CHAPTER ONE INTRODUCTION 1. BACKGROUND TO THE STUDY ICT is an acronym for information and communication Technology. It is a set of technological tools and resources used to communicate, create, disseminate, store and manage information (Tinio, 2004). This technology include computers, the interest, broad casting technology (such as radio and television), and telephony according to O’leary & O’ leary (2004) refers to a communication process that uses the interest rather than traditional

    Words: 5553 - Pages: 23

  • Williams Machine Tool Company

    Williams Machine Tools Company – A case study Background Williams Machine Tool Company was the third largest US based machine tool manufacturer by 1990. Williams felt the boom during 1980 – 1990 with record level profits. William’s success came from a single product line of standard manufacturing machine tools. The company focused chiefly on this product line rather than diversify with new products. Situation during early 90’s: The recession of the early 1990’s has significantly

    Words: 531 - Pages: 3

  • Eastboro Machine Tools Corporation

    Capital 12. ‘‘Best Practices’’ in Estimating the Cost of Capital: Survey and Synthesis 15. Teletech Corporation, 1996 IV. Capital Budgeting and Resource Allocation 19. Diamond Chemicals PLC (A): The Merseyside Project 20. Diamond Chemicals PLC (B): Merseyside and Rotterdam Projects VI. Management of the Corporate Capital Structure 29. Structuring Corporate Financial Policy 31. Polaroid Corporation, 1996 VIII. Valuing the Enterprise: Acquisitions and Buyouts 41. Palamon Capital Partners/TeamSystem

    Words: 54708 - Pages: 219

  • Hampton Machine Tools

    Cases in Finance September 26, 2012 Dr. Thomas McCue Case 1: Hampton Machine Tools Evan Cvejkus Hampton Machine Tools is a company that specializes in the production and manufacturing of machine tools. The company has been in existence since 1915 and weathered all economic and internal struggles where most of their competitors met defeat. In order to purchase new equipment, Hampton requires a new loan of $350,000 and also wants to renew their current loan of $1,000,000 that will soon expire

    Words: 546 - Pages: 3

  • Case 5-2: North Country Auto- Teaching Notes

    Case 5-2: North Country Auto- teaching notes (case facts in red) Internal Environment – key facts about the Company • North Country Auto is a: Franchised dealer & factory authorized service centre– 3 manufacturers (SAAB, Ford, VW) o Began operations in 1968 o 5 departments (new car sales, used car sales, service, body, and parts) o Situated in upstate NY- pop. 20,000, served two nearby towns of 4,000 people as well as rural areas covering a 20 mile radius • George Liddy & Andrew Jones –

    Words: 3250 - Pages: 13

  • Gainesboro Machine Tools Corporation Teaching Note

    GAINESBORO MACHINE TOOLS CORPORATION Teaching Note Synopsis and Objectives Other cases in which dividend policy is an important issue: “Deutsche Brauerei,” (Case 11) In mid September 2005, Ashley Swenson, the chief financial officer (CFO) of a large computer-aided design and computer-aided manufacturing (CAD/CAM) equipment manufacturer needed to decide whether to pay out dividends to the firm’s shareholders, or to repurchase stock. If Swenson chose to pay out dividends, she would have

    Words: 5756 - Pages: 24

  • Case Study of Pinnacle Machine Tool .Co

    Case for critical analysis: Pinnacle Machine Tool Co. Introduction Pinnacle Machine Tool Co., it is a small, publicly held Indiana-based machine tool Company, it was founded in 1976. This company specializes in manufacturing all kind of machine centres. They too have excellent experiences in Technology, Quality and Service (Pinnacle Machine Tool Co. Ltd.). Problem Statement How is Pinnacle going to avoid its company to fall off the market? Is entering a new market the only solution to defend

    Words: 1741 - Pages: 7

  • A Votre Sante Teaching Note

    TEACHING NOTE: A VOTRE SANTÉ The A Votre Santé (AVS) case is multi-faceted in that it requires students to incorporate operational measures into product costing results, and also to understand cost accounting from a variety of perspectives, such as: * Product versus period costs * Variable versus fixed costs * Activity based costing * Relevant costs and opportunity costs Additionally, the case questions require both quantitative and qualitative analyses of the business issues

    Words: 1485 - Pages: 6

  • Williams Machine Tool Company

    WILLIAMS MACHINE TOOL COMPANY CASE STUDY For 85 years, the Williams Machine Tool Company had provided quality products to its clients, becoming the third largest U.S.-based machine tool company by 1990. The company was highly profitable and had an extremely low employee turnover rate. Pay and benefits were excellent. Between 1980 and 1990, the company’s profits soared to record levels. The company’s suc- cess was due to one product line of standard manufacturing machine tools. Williams spent most

    Words: 623 - Pages: 3

  • Northboro Machine Tools

    Northboro Machine Tools Corporation * History * Founded in 1923 by two mechanical engineers and designed machinery parts, presses, dies, and molds * 1970s, firm begins its entry into computer aided manufacturing and design or CAD/CAM * By 1991, CAD/CAM made up 40% of sales * Revenue in 1991 * CAD/CAM accounted for 45% of sales * Metal presses, dies and molds accounted for 40% of sales * Miscellaneous machine tools accounted for 15% of sales *

    Words: 665 - Pages: 3

  • Gainesboro Case Study

    Founded in 1923, the Gainesboro Corporation was originally designed as a manufacturer for various machine parts. As the years went on and technology improved they revamped the company by entering into the new field of computer-aided design and computer-aided manufacturing. The company is currently facing a tough decision as to what type of dividend to payout which has been inconsistent for numerous years. Gainesboro Corporation faces three possible dividend polices that is recommended to help the

    Words: 321 - Pages: 2

  • International Business Machines Corporation (Ibm)

    International Business Machines Corporation (IBM) Name Institution Date Abstract The International Business Machines Corporation work to offer innovation on the global economy through its high value solution and the integrated technology of business model so that it can produce measurable results for its customers. This research study intends to bring out the implementation of IBM in different fields of competition, target market, product strategy, distribution, communication and pricing

    Words: 1253 - Pages: 6

  • Tool

    Analysis Tools 1. Comparative financial statement analysis We can get information about accounting changes and direction, speed, and extent of trends from period to period, which reveal in balance sheets, income statements, or statements of cash flows. There are two popular comparative analysis techniques: ① Year-to year change analysis ② Index-number trend analysis Year-to year change analysis: ·over short time/ period

    Words: 1148 - Pages: 5

  • Pinnacle Machine Tool Company

    Pinnacle Machine Tool Company Don Anglos had to decide whether to trust his gut or his head, and he had to make that decision by next week’s board meeting. Either way, he knew he was bound to make at least a member or two of his senior management team unhappy. The question at hand was whether Pinnacle Company, the small, publicly held Indiana-based machine tool company he led as CEO, should attempt to acquire Hoilman Inc. Hoilman was a company known for the cutting-edge sensor technology and communications

    Words: 777 - Pages: 4

  • Eastboro Machine Tools Corporation

    Eastboro Machine Tools Corporation Problem Statement When considering whether or not it is necessary to pay dividend, Eastboro Machine Tools Corporation is facing a problem, i.e. how to provide enough cash to ensure the upcoming aggressive growth in the following years. If dividend is necessarily paid, how much dividend will be paid to benefit the shareholders most in the long run? Situation Analysis After two massive restructurings, the firm seems to get in a quick track to development

    Words: 570 - Pages: 3

  • Benihana Teaching Note

    variability, and illustrates concepts such as the product-process spectrum, the impact of a bottleneck, and the advantage of simultaneous product and process engineering. Keywords: process analysis, simulation, variability, queueing. 1. Introductory Note Benihana might be thought of as an “old classic” in Operations Management. The original Harvard Business School (HBS) version was published in 1972, but the Harvard case continues to be a best seller. This short case heavily references the HBS case

    Words: 8519 - Pages: 35

  • Eastboro Machine Tools

    Available Eastboro Machine Tools 1. In theory, to fund an increased dividend payout, a firm might invest less, borrow more, or issue more stock. Which of these three elements is Eastboro management willing to vary and which elements remain fixed as a matter of policy? 2. What happens to Eastboro’s financing needs and unused debt capacity if o No dividends are paid o A 20 percent payout is pursued o A 40 percent payout is pursued o A residual payout policy is pursued 3. Note that case Exhibit

    Words: 1403 - Pages: 6

  • Case Note for Machine Vision International

    Alla Popova Management 245 Machine Vision International Case № 12 Basic information: Name of the company: Machine Vision International . Was founded in June 1981 by Dr. Stanley R. Sternberg. Specialization: The business areas were automotive, electronics, and general industrial. A machine vision products is a high-technology, computer-based image processing system enabling a machine or other device to “see”. The use of this

    Words: 794 - Pages: 4

  • Gainesboro Dividend Case Study

    EFB 360 Finance Capstone Case Study 2 Distribution to shareholder: Dividends and Repurchase The case of Gainesboro Machine Tool Corporation Abstract 1 Introduction 1 Dividend Irrelevance Proposition 1 Financial Flexibility 2 Agency Theory 2 Signalling Theory 3 Clientele Effects 4 The Optimal Payout Ratio 5 Share Repurchase 7 Conclusion 8 References 10 Appendices 13 Appendix 1: Detailed Calculation of Unused Debt Capacity (0%, 20%, 40% and residual payout) 13 Appendix

    Words: 2910 - Pages: 12

  • Eastboro Machine Tools Corporation

    collect your handsome profit. What’s more you can do it all from the comfort of your home computer or laptop. All you need is an online brokerage account and a live up-to-the minute intraday graph. However, if you know how to use these simple tools and, you have the ability to focus on the market for approximately one hour each week. There is No Limit to the Amount Of Profits You Can Make In case you’re skeptical, you needn’t risk a penny in testing it out. Most online brokerages allow you

    Words: 2938 - Pages: 12

  • Teachings Note California Pizza Kitchen

    CALIFORNIA PIZZA KITCHEN Teaching Note Synopsis and Objectives This case examines the question of financial leverage at California Pizza Kitchen (CPK) in July 2007. With a highly profitable business and an aversion to debt, CPK management is considering a debt-financed stock buyback program. The case is intended to provide an introduction to the Modigliani-Miller capital structure irrelevance propositions and the concept of debt tax shields. With the background of a pizza company, the

    Words: 2393 - Pages: 10

  • The Black & Decker Corporation (a): Power Tools Division

    The Black & Decker Corporation (A): Power Tools Division Black & Decker, the creator of the power tools industry, caters to the three major segments of the power tools business namely, Industrial, Tradesmen, and Consumer. D&B’s market share is almost the same as Milwaukee and Makita in the Industrial and Consumer segment but with regards to the Tradesmen segment, B&D is behind. Despite its major presence in the industry, it faces a problem in the Tradesmen segment which only

    Words: 651 - Pages: 3

  • Stern Corporation

    Case 7 1: Stern Corporation (B)* Note: This case is updated from the Twelfth Edition. Approach This is a straightforward problem, designed for use in connection with study of the text. I find it useful to put T-accounts on the board or on a Vugraph and post entries to them as they are given. The account titles given in the balance sheet should be used. The case assumes individual unit depreciation. It may be desirable to ask at some point what the entries would be if composite or group depreciation

    Words: 442 - Pages: 2

  • Simpson Machine Tool Company: Sales Management Seminar

    [pic] John Smith ACME Corporation 123 Corporate Lane Milford, CT 06461 March 2, 2007 Charles Jones CFO Fictiona, Inc. 456 Executive Drive Anywhere, CT 06777 Dear Charles Jones: As a long-time admirer of the outstanding work that your organization has done in the market, I particularly enjoyed having the opportunity to see how your company functions from the inside. As you indicated during our meeting, your organization has grown to a point where it needs to dramatically enhance its accounting

    Words: 666 - Pages: 3

  • Eastboro Machine Tools Corporation

    be completed in Word format. Please show all workings. 3. Late assignments will not be accepted unless arrangements have been made with myself before the due date. EASTBORO MACHINE TOOLS CORPORATION In mid-September of 2001, Jennifer Campbell, chief financial officer of Eastboro Machine Tools Corporation, paced the floor of her Minnesota office. She needed to submit a recommendation to Eastboro’s board of directors regarding the company’s dividend policy, which had been the subject of

    Words: 6110 - Pages: 25

  • Hampton Machine Tool Company

    Hampton Machine Tool Company On September 14, 1979, Mr. Jerry Eckwood, vice president of the St. Louis National Bank was considering a loan request from a customer located in a nearby city. The company, Hampton Machine Too] Company, had requested renewal of an existing $1 million loan originally due to be repaid on September 30. In addition to the renewal of the existin- loan, Hampton was asking for an additional loan of $350,000 for planned equipment purchases in October. Under the terms

    Words: 2299 - Pages: 10

  • Hampton Machine Tool Company Case Study

    On September 12, 1979, Hampton Machine Tool Company (HMTC) requested from St. Louis National Bank a renewal to their loan of $1,000,000 due to be repaid on September 30, 1979 and also to be given an additional loan of $350,000 for new equipment purchases in October 1979. Both loans were to be repaid on December 31, 1979. Hampton M.T. Company wrote a letter to the St. Louis National Bank stating the reasons for the extension of the loan and the need of the additional loan, and giving the current and

    Words: 1390 - Pages: 6

  • Deluxe Corporation Teaching Note

    DELUXE Corporation Teaching Note Synopsis and Objectives Suggestions for complementary cases in capital structure choice and financial flexibility: “The Wm. Wrigley, Jr. Company: Capital Structure, Valuation, and Cost of Capital,” (case 30); “Rosario Acero S.A.,” (case 32); “Gainesboro Machine Tools Corporation,” (case 25) In July 2002, an investment banker advising Deluxe Corporation must prepare recommendations for the company’s board of directors regarding the firm’s financial

    Words: 4191 - Pages: 17

  • Minimization of the Number of Tool Magazine Setups on Automated Machines: a Lagrangean Decomposition Approach

    Article Title: Minimization of the Number of Tool Magazine Setups on Automated Machines: A Lagrangean Decomposition Approach Author(s): Meltem Denizel Source: Operation Research, Vol. 51, No. 2 (Mar. – Apr., 2003), pp. 309-320 SYNOPSIS: With a competitive environment, manufacturing companies should be flexible in terms of performance and competitiveness. The consumers nowadays required more of product customization and short product life cycles. With these demands, manufacturing companies are

    Words: 941 - Pages: 4

  • Xh-Corporation

    XH-Corporation Mr P Velledurai CEO of largest manufacturer of Plastic Components of Automobile sector in India having turnover of approximately 2000 crores is sitting confused in his cabin wondering, has he made wrong decision of procuring a battery of 16 highly sophisticated CNC Machines from XH-Machining corporation in this financial year 2012-13. Mr PV has vast experience in precision machining sector having worked with Aerospace, Nuclear Science and Defense companies and after retirement working

    Words: 958 - Pages: 4

  • Gainesboro Case Study

    Gainesboro Case Study March 25, 2011 Gainesboro Case Study Solutions 1. The proposed dividend policies all have both positive and negative aspects. a. A zero-dividend policy would assist in supporting new high-tech endeavors (CAD/CAM machines) by preserving capital, as well as support sentiments of growth within the company. However, there is a possibility that value-oriented investors and those looking for steady cash flows will jump ship. b. A 40% (approx. $.20 dividend) payout policy would

    Words: 438 - Pages: 2

  • Teaching Business Ethics and Environmental Responsbility, Using Hinduism as a Tool.

    Teaching Business Ethics and Environmental Responsbility, Using Hinduism As A Tool. Abstract The crux of Hinduism is to revere nature in all its forms as they are considered to be manifestations of God himself. Even humankind is understood to be a composition of elements of nature and therefore maintaining a symbiotic relationship is essential for self preservation which is reinforced through the theory of karma which lays heavy emphasis on one’s action and corresponding rewards and punishment

    Words: 3051 - Pages: 13

  • Machine Shop Tools

    Ricamonte, Ralph Precision Tools 1.) Vernier Caliper – a precision instrument that can be used to measure internal and external distances extremely accurately. 2.) Height Gage – a tool which used for measuring height 3.) Steel Ruler – a tool used for measuring objects 4.) Combination Square – a multi-purpose precision instrument which of a steel rule that slides through an adjustable protractor head or level or a center head. 5.) Precision Square – a tool used for 90 degrees alignment

    Words: 413 - Pages: 2

  • Data Mining Practical Machine Learning Tools and Techniques - Weka

    Data Mining Practical Machine Learning Tools and Techniques The Morgan Kaufmann Series in Data Management Systems Series Editor: Jim Gray, Microsoft Research Data Mining: Practical Machine Learning Tools and Techniques, Second Edition Ian H. Witten and Eibe Frank Fuzzy Modeling and Genetic Algorithms for Data Mining and Exploration Earl Cox Data Modeling Essentials, Third Edition Graeme C. Simsion and Graham C. Witt Location-Based Services Jochen Schiller and Agnès Voisard Database

    Words: 191947 - Pages: 768

  • Hampton Tool Machine

    Introduction Hampton Machine Tool Company, a machine tool manufacturer, was founded in 1915. Hampton's customer base is made up primarily of military aircraft manufactures and automobile manufacturers in the St. Louis area. Hampton felt the boom in the 1960 with record setting profits in the mid to late 1960. Hampton slowed down in the 1970s with the withdrawal from Vietnam War and the oil embargo. Hampton stabilized by the late 1970s and now has a larger market share, as other competitors were

    Words: 1386 - Pages: 6

  • Williams Machine Tool Company

    For 85 years, the Williams Machine Tool Company had provided quality products to its clients, becoming the third largest U.S.-based machine tool company by 1990. The company was highly profitable and had an extremely low employee turnover rate. Pay and benefits were excellent. Between 1980 and 1990, the company’s profits soared to record levels. The company’s success was due to one product line of standard manufacturing machine tools. Williams spent most of its time and effort looking for ways to

    Words: 608 - Pages: 3

  • Hampton Machine Tool Company Case Study

    HAMPTON MACHINE TOOL COMPANY On September 14, 2007, Jerry Eckwood, vice president of the Wellington National Bank was considering a loan request from a customer also located in Wellington, New Zealand. The company, Hampton Machine Tool Company, had requested renewal of an existing $1 million loan originally to be repaid September 30, 2007. In addition to the renewal of the existing loan, Hampton was asking for an additional load of $350,000 for planned equipment purchases in October. Under

    Words: 2005 - Pages: 9

  • Hampton Machine Tool

    At the end of December 1978, Hampton Machine Tool took out a $1 million loan from the St. Louis National Bank. On September 14, 1979, the company asked for an extension of the loan to the end of December 1979. Moreover, Hampton has asked for an additional $350,000 loan to be repaid at the same time as the previous loan. Both loans are to be repaid with monthly interest payments at the rate of 1.5%. The underlying problem affecting Hampton Machine Tools is its ability to payback its current loan and

    Words: 300 - Pages: 2

  • Gainesboro Machine Tools Corp

    Gainesboro Machine Tools Corporation In this case we analyze the impact of an external issue (hurricane Katrina) on the dividend policy of the company. Ashley Swenson, CFO of Gainesboro Machine Tools Corporation, needs to decide whether to buy back stock or pay dividend to shareholders, considering the significant drop after the storm and the possibility of a significant increase in the near future. She should recommend one of these three policies: Zero dividend payout, 40% dividend payout (dividend

    Words: 410 - Pages: 2

  • Accounting: Tools for Business Decision Making Edition 5 Chapter 1 Notes

    Accounting: Tools for Business Decision Making 5th Edition Chapter 1 1. Forms of Business Organizations * Sole proprietorship: owned by one person * Easy to set up * Gives you control * Examples: barber shops, law offices, auto repair shops * Partnership: business owned by two or more people * More economic resources * Unique skills and resources * Important to have written partnership agreement forms * Examples: retail and service-type

    Words: 782 - Pages: 4

  • Case 29 Gainesboro Machine Tools Corporation

    increased dividend payout or a stock buyback, a firm might invest less, borrow more, or issue more stock. Which of those three elements is Gainesboro's management willing to vary, and which elements remain fixed as a matter of the company's policy? Gainesboro wants to increase value to shareholders but also keep paying dividends. However, the company's main concern is the debt to equity ratio. The cap Gaineboro set is at 40% and anything over this percentage is “unthinkable, indicative of sloppy management

    Words: 1110 - Pages: 5

  • Ricardo Semler Teaching Notes

    Ricardo Semler: A Revolutionary Model of Leadership TEACHING NOTE 04/2014-5982 This teaching note was written by William W. Maddux, Associate Professor of Organisational Behaviour at INSEAD, and Roderick I. Swaab, Assistant Professor of Organisational Behaviour at INSEAD, in conjunction with Betania Tanure, Professor of Organisational Behaviour at PUC / BTA, and case writer Elin Williams, as an aid to instructors in the classroom use of the case “Ricardo Semler: A Revolutionary Model of

    Words: 4234 - Pages: 17

  • Pinnacle Machine Tool Case Study

    make that decision by next week’s board meeting. Either way, he knew he was bound to make at least a member or two of his senior management team unhappy. • The question at hand was whether Pinnacle Co., the small, publicly held Indiana-based machine tool company he led as CEO, should attempt to acquire Hoilman Inc. Hoilman was a company known for the cutting-edge sensor technology and communications software it had developed to monitor robotics equipment. Anglos had just heard a credible rumour

    Words: 713 - Pages: 3

  • Gainesboro Machine Tools Corporation Executive Summary

    Statement of the Problem Established in 1923, Gainesboro Machine Tools Corporation (Gainesboro) started out manufacturing machinery parts but by the 1980s started to pioneer in the industry of computer aided design (CAD) and computer aided manufacturing (CAM). Competition ramped up in the 1990s and Gainesboro’s revenues per share declined by 16% from 1998-2004 (Exhibit 5). The company restructured itself and focused more resources on innovation. By late 2004 the company started to turn around its

    Words: 1382 - Pages: 6

  • Gainesboro

    United States. Because of the storm, the stock market notably fell down. Since it is possible that the price of the shares once more increase even more than before in the near future, Ashley Swenson, chief financial officer (CFO) of Gainesboro Machine Tools Corporation has the dilemma to buy back stock or to spend the money as dividend the shareholders. In fact, the question is: How can she forecast the fortune of the stock market? In the other word, what are the driving forces (as the external factors)

    Words: 7383 - Pages: 30

  • Eastboro Machine Tools Corporation

    communicate the expectation, objective with your manager while PMD discussion so that you can choose the appropriate course through this booklet. You are the owner of your development. The deadline of training nomination is Feb.28, 2011. Editor’s note 关于学习管理系统 赛默飞世尔总部于 2010 年 12 月 16 日正式启用学习管理系统(LMS) 。该系统是一种应 用软件,将用来管理、记录、追踪和报告培训项目如课堂培训、在线培训和网络培训等。 建立学习管理系统(LMS)的主要目的是为所有员工增加培训的机会、方便培训内容的 共享与存储、提高使用者和管理层的可见性以及充分利用资源管理,用有限的资源创造最佳 成效。 赛默飞世尔中国大学也将充分利用这个学习平台,在将 2011 年的课程目录建立到学习管 理系统(LMS)中的同时,还将运用该系统来管理员工的学习情况。另外我们还会开发多种

    Words: 8252 - Pages: 34

  • Starbucks Teaching Note

    Starbucks Coffee Company Teaching Note Overview The Starbucks Coffee Company case offers students an opportunity to explore the tradeoffs between a successful business strategy (in this case, its focus on the purchase of the highest quality coffee, which is at the heart of this business) and the company’s interest in maintaining and enhancing its reputation as a socially responsible company. The case focuses on the CEO, Orin Smith and his decision whether to purchase and offer fair trade coffee

    Words: 1342 - Pages: 6

  • Machine Tools

    Hampton Case Study Study Case: Hampton Machine Tool Background. Hampton Machine Tool Company, a machine tool manufacturer, was founded in 1915. Hampton's customers are military aircraft and automobile manufacturers in the St. Louis area. Machine Tool Company felt the boom in the 1960`s with record setting profits in the mid- to late- 1960`s. The company slowed down in the 1970`s economic recession caused by Vietnam War and the oil embargo. Hampton stabilized by the late 1970`s and now has

    Words: 342 - Pages: 2

  • Hampton Machine Tool Company Analysis

    Student ID#: 285 Firm: Hampton Machine Tool Company Nature of business: Machine Tool Manufacturing Overview Hampton Machine Tool Company was founded in 1915 and experienced record production and profitability throughout the years despite hard economic times for the machine manufacturing business. Sales declined throughout the mid 1970’s from the post Vietnam War demand, the declining automobile industry in St. Louis, and the gas embargo of the early 1970’s. Hampton did eventually recover due

    Words: 758 - Pages: 4

  • Machine

    * 024197071 (directline) * FOR SALE  * BROTHER COPIER PRINTER SCANNER * 15,000.00 * * COPIER SALES*SERVICE*TONER*SPAREPARTS * DRUM*CARTRIDGE*ROLLERS * BEWARE * ALWAYS ASK FOR OFFICIAL RECIEPT MARCXMANTRADE CORPORATION P  H  O  T  O  C  O  P  I  E  R  S PHOTOCOPIER FOR SALE 100% SATISFACTION GUARANTEED! FULL PARTS and SERVICE WARRANTY   • FREE OPERATIONS TRAININ • FREE TECHNICAL TRAINING   FREE DELIVERY                                            

    Words: 1437 - Pages: 6

+
-